fbpx
Skip to content
SG16 Stump Grinder

SG16 Stump Grinder

Specifications

Cutting Depth - Below Ground 20.5 in
Cutting Head Extension 11 in
Cutting Head Speed at Maximum Flow 993 rpm
Cutting Head Swing Range 70 degrees
Cutting Height - Above Ground 18.5 in
Cutting Wheel Diameter - With Teeth 21.5 in
Cutting Wheel Width - With Teeth 3.3 in
Cutting Width - Full Swing Range 60 in
Drive Method Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure 217.6 lb/ft
Motor Displacement 4.9 in³
Number of Carbide Teeth per Cutting Wheel 32
Optimal Hydraulic Flow 42-86 L/min (11-23 gpm)
Optimal Hydraulic Pressure 145-235 bar (2100-3400 psi)
Overall Height 28.7 in
Overall Length 68.4 in
Overall Width 46.3 in
Required Hydraulics Standard Flow
Weight 835.6 lb

Download resources

Cat® Stump Grinders Brochure
Download

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Address

Related Products

Cat 908 Compact Wheel Loader
Cat 908 Compact Wheel Loader
Cat 907 Compact Wheel Loader
Cat 907 Compact Wheel Loader
Cat 906 Compact Wheel Loader
Cat 906 Compact Wheel Loader
903D Compact Wheel Loader
903D Compact Wheel Loader
260 Skid Steer Loader
260 Skid Steer Loader
262D3 Skid Steer Loader
262D3 Skid Steer Loader
246D3 Skid Steer Loader
246D3 Skid Steer Loader
242D3 Skid Steer Loader
242D3 Skid Steer Loader
236D3 Skid Steer Loader
236D3 Skid Steer Loader
232D3 Skid Steer Loader
232D3 Skid Steer Loader
226D3 Skid Steer Loader
226D3 Skid Steer Loader
299D3 XE Land Management Compact Track Loader
299D3 XE Land Management Compact Track Loader
299D3 XE Compact Track Loader
299D3 XE Compact Track Loader
299D3 Compact Track Loader
299D3 Compact Track Loader
265 Compact Track Loader
265 Compact Track Loader
255 Compact Track Loader
255 Compact Track Loader
249D3 Compact Track Loader
249D3 Compact Track Loader
239D3 Compact Track Loader
239D3 Compact Track Loader

Specifications

Cutting Depth - Below Ground 20.5 in
Cutting Head Extension 11 in
Cutting Head Speed at Maximum Flow 993 rpm
Cutting Head Swing Range 70 degrees
Cutting Height - Above Ground 18.5 in
Cutting Wheel Diameter - With Teeth 21.5 in
Cutting Wheel Width - With Teeth 3.3 in
Cutting Width - Full Swing Range 60 in
Drive Method Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure 217.6 lb/ft
Motor Displacement 4.9 in³
Number of Carbide Teeth per Cutting Wheel 32
Optimal Hydraulic Flow 42-86 L/min (11-23 gpm)
Optimal Hydraulic Pressure 145-235 bar (2100-3400 psi)
Overall Height 28.7 in
Overall Length 68.4 in
Overall Width 46.3 in
Required Hydraulics Standard Flow
Weight 835.6 lb

Call us today: 1-877-778-2230
or  Send us a message