903D Compact Wheel Loader

903D Compact Wheel Loader

Configured for Success

Bucket Capacities	0.6-1.0 m3 (0.8-1.3 yd3)
Bucket Capacities - General Purpose	0.6 m3 (0.8 yd3)
Bucket Capacities - Light Material	1.0 m3 (1.3 yd3)

Bore	3.4 in
Displacement	147 in²
Engine Model	Cat C2.4*
Gross Power	42 HP
Maximum Gross Power	42 HP
Net Power - 2,200 rpm - ISO 9249 R-ing	40 HP
Net Power - 2,200 rpm - SAE J1349 R-ing	40 HP
Note	*Engine meets U.S. EPA Tier 4 Final emission standards.
Stroke	4 in

Operating Weight

9414 lb

Travel Speed

12.4 mile/h

3rd Auxiliary Flow	14 gal/min
Hydraulic Cycle Time - Lower, Float	2.4 s
Main Relief	3481 psi

Hydraulic Cycle Time - Dump	0.7 s
Hydraulic Cycle Time - Lift	4.4 s

FOPS	ISO 3449:2005 Level I
ROPS	ISO 3471:2008

Articulation Angle	40°
Cab Height	8.25 ft
Departure Angle - Degrees	30°
Dig Depth	6 in
Dump Angle at Maximum Height	40°
Fork Depth Above Ground	2 in
Fork Height at Maximum Reach	4.67 ft
Fork Reach at Maximum Height	2 ft
Ground Clearance	10 in
Hinge Pin at Maximum Height	10.08 ft
Load Over Height	9.17 ft
Machine Width**	5.58 ft
Maximum Dump Height*	7.5 ft
Maximum Fork Height	9.83 ft
Maximum Reach	4.5 ft
Note (1)	*Vary with bucket size.
Note (2)	**Vary with tire size.
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Overall Length - With Bucket*	15.75 ft
Overall Length - With Forks	17.08 ft
Reach - Ground Level	2.67 ft
Reach at Maximum Dump Height*	2.33 ft
Steering Angle	80°
Tire Gauge	4.33 ft
Turning Radius - Inside Tire**	5.92 ft
Turning Radius - Over Bucket*	13.17 ft
Wheel Base	6.42 ft
Width - Over Bucket*	5.83 ft

Articulation Angle	40°
Cab Height	8.25 ft
Departure Angle - Degrees	30°
Dig Depth	8 in
Dump Angle at Maximum Height	40°
Fork Depth Above Ground	2 in
Fork Height at Maximum Reach	4.67 ft
Fork Reach at Maximum Height	2 ft
Ground Clearance	10 in
Hinge Pin at Maximum Height	10.58 ft
Load Over Height	9.67 ft
Machine Width**	5.58 ft
Maximum Dump Height*	8 ft
Maximum Fork Height	10.33 ft
Maximum Reach	4.92 ft
Note (1)	*Vary with bucket size.
Note (2)	**Vary with tire size.
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Overall Length - With Bucket*	16.17 ft
Overall Length - With Forks	17.58 ft
Reach - Ground Level	3.25 ft
Reach at Maximum Dump Height*	2.42 ft
Steering Angle	80°
Tire Gauge	4.33 ft
Turning Radius - Inside Tire**	5.92 ft
Turning Radius - Over Bucket*	13.42 ft
Wheel Base	6.42 ft
Width - Over Bucket*	5.83 ft

Breakout Force	6160 lbf
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5401 lb
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5512 lb
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)	***Manual quick coupler, precleaner hood.
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Operating Weight	9414 lb
Rack Back - Transport Position	51°
Rated Bucket Capacity	0.8 yd³
Rated Operating Load at Full Turn - Bucket***	2701 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3366 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2524 lb
Straight Tipping Load - Bucket***	6415 lb
Tire Size	33 × 15.5-16.5, 12 PR

Breakout Force	6204 lbf
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5004 lb
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5115 lb
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)	***Manual quick coupler, precleaner hood.
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Operating Weight	9462 lb
Rack Back - Transport Position	51°
Rated Bucket Capacity	0.8 yd³
Rated Operating Load at Full Turn - Bucket***	2502 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3148 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2361 lb
Straight Tipping Load - Bucket***	5975 lb
Tire Size	33 × 15.5-16.5, 12 PR

Bucket Type	General Purpose
Bucket Width	70 in
Dump Height	90 in
Maximum Material Density	3169 lb/yd³
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Rated Capacity	0.8 yd³

Bucket Type	Light Material
Bucket Width	74 in
Dump Height	85 in
Maximum Material Density	1989 lb/yd³
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Rated Capacity	1.3 yd³