232D3 Skid Steer Loader

Request a Free Quote
Download Brochure

The Cat® 232D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Engine

Gross Power - SAE J1995
67.1 HP
Net Power - SAE 1349
65.8 HP
Displacement
134.3 in³
Stroke
3.9 in
Bore
3.3 in
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
Net Flywheel Power
65.8 HP
Net Power - ISO 9249
66.5 HP
Engine Model
Cat C2.2 CRDI

Operating Specifications

Rated Operating Capacity
1900 lb
Tipping Load
3800 lb
Breakout Force - Tilt Cylinder
3928 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Rated Operating Capacity with Optional Counterweight
2000 lb

Weights

Operating Weight
6514 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,

Dimensions

Wheel Base
41.5 in
Height - Top of Cab
79.9 in
Vehicle Width over Tires
58.9 in
Ground Clearance
6.7 in
Departure Angle
27.9°
Maximum Dump Angle
47.4°
Length - Without Bucket
99.3 in
Clearance at Maximum Lift and Dump
88.7 in
Bucket Pin Reach - Maximum Lift
8.8 in
Maximum Overall Height
150.9 in
Turning Radius from Center - Machine Rear
59.6 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Bucket Pin Height - Carry Position
8.4 in
Length - With Bucket on Ground
127.3 in
Bumper Overhang - Behind Rear Axle
35.2 in
Turning Radius from Center - Bucket
77.8 in
Maximum Reach - With Arms Parallel to Ground
49.2 in
Bucket Pin Height - Maximum Lift
118.1 in
Reach - Maximum Lift/Dump
25.7 in
Rack Back Angle - Maximum Height
88.2°
Turning Radius from Center - Coupler
43.4 in

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
3.2 gal (US)
Engine Crankcase
2.6 gal (US)
Fuel Tank
15.1 gal (US)
Hydraulic System
11.9 gal (US)
Hydraulic Tank
9 gal (US)
Chain Box - Each Side
1.8 gal (US)

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP

Power Train

Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h

Noise Level

Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*
83 dB(A)
Outside Cab**
101 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Air Conditioning System (if equipped)

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.