Engine - U.S. EPA Tier 2/3 Equivalent
|
Bore
|
5.7 in³
|
|
Displacement
|
1106 in³
|
|
Emissions
|
U.S. EPA Tier 2 or Tier 3 equivalent
|
|
Engine Model
|
Cat® C18
|
|
Engine Power - Gross SAE J1995
|
487 HP
|
|
Engine Power - ISO 14396
|
479 HP
|
|
Engine Power - Net SAE J1349/ISO 9249
|
452 HP
|
|
Note (1)
|
All engine ratings apply at 1,750 rpm.
|
|
Note (2)
|
No derating required up to 4267 m (14,000 ft) altitude.
|
|
Stroke
|
7.2 in
|
Engine - U.S. EPA Tier 4 Final/EU Stage V
|
Bore
|
5.7 in³
|
|
Displacement
|
1106 in³
|
|
Emissions
|
U.S. EPA Tier 4 / EU Stage V
|
|
Engine Model
|
Cat® C18
|
|
Engine Power - Gross SAE J1995
|
477 HP
|
|
Engine Power - ISO 14396
|
468 HP
|
|
Engine Power - Net SAE J1349/ISO 9249
|
440 HP
|
|
Note (1)
|
All Engine ratings apply at 1,750 rpm.
|
|
Note (2)
|
No derating required up to 2499 m (8,200 ft).
|
|
Stroke
|
7.2 in³
|
FLUID CAPACITIES
|
Cooling System
|
21 gal (US)
|
|
DEF Tank (Tier 4 only)
|
9.5 gal (US)
|
|
Engine Crankcase*
|
10 gal (US)
|
|
Final Drives (each)
|
4 gal (US)
|
|
Fuel Tank (Fast Fill)
|
248 gal (US)
|
|
Fuel Tank (Splash Fill)
|
254 gal (US)
|
|
Hydraulic System Tank
|
24 gal (US)
|
|
Note
|
*With oil filters.
|
|
Note 2
|
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
|
|
Note 3
|
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
|
|
Note 4
|
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
|
|
Pivot Shaft Oil
|
8 gal (US)
|
|
Powertrain
|
40 gal (US)
|
|
Roller Frames (each)
|
12 gal (US)
|
Weights
|
Note (1)
|
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
|
|
Note (2)
|
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
|
|
Operating Weight
|
110225 lb
|
|
Shipping Weight
|
84373 lb
|
Hydraulic Controls
|
Fan Pump
|
21 gal/min
|
|
Lift Cylinder Relief Valve Setting
|
3800 lbf/in
|
|
Note (1)
|
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
|
|
Note (2)
|
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
|
|
Note (3)
|
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
|
|
Pump Output - Steering
|
96 gal/min
|
|
Pump Type
|
Piston-type geared to flywheel
|
|
Ripper - Lift - Relief Valve Setting
|
3800 psi
|
|
Ripper - Pitch - Relief Valve Setting
|
3800 psi
|
|
Steering System - Pressure
|
5874 psi
|
|
Tank Capacity
|
24 gal/min
|
|
Tilt Cylinder Flow - Head End Flow
|
53 gal/min
|
|
Tilt Cylinder Flow - Rod End Flow
|
53 gal/min
|
|
Tilt Cylinder Relief Valve Setting
|
2799 psi
|
Undercarriage
|
Ground Clearance
|
18.1 in
|
|
Ground Contact Area
|
45.6 ft²
|
|
Grouser Height
|
3.3 in
|
|
Length - Track on Ground
|
136.6 in
|
|
Number of Carrier Rollers
|
1 per side (optional)
|
|
Pitch
|
9.4 in
|
|
Shoe Type
|
Extreme Service
|
|
Shoes/Side
|
43
|
|
Track Gauge
|
88.6 in
|
|
Track Rollers/Side
|
8
|
|
Width - Shoe
|
24 in
|
Steering and Brakes
|
Brake Count
|
8
|
|
Brake Diameter
|
15.5 in
|
|
Brake Type
|
Spring Applied Wet Disc
|
|
Steering Type
|
Differential
|
Air Conditioning System
|
Air Conditioning
|
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
|
Standards
|
FOPS
|
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
|
|
ROPS
|
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
|
|
Sound
|
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. NOTE: The dynamic sound power level uncertainty is +/-2 dB(A).
|
|
Sound (1)
|
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A).
|
|
Sound (2)
|
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
|
Transmission
|
1.0 Forward
|
2.2 mile/h
|
|
1.0 Reverse
|
2.7 mile/h
|
|
2.0 Forward
|
3.9 mile/h
|
|
2.0 Reverse
|
4.8 mile/h
|
|
3.0 Forward
|
6.8 mile/h
|
|
3.0 Reverse
|
8.4 mile/h
|
|
Type
|
Planetary powershift
|
Blade - Semi-Universal
|
Blade Capacity (SAE J1265)
|
17.8 yd³
|
|
Blade Height
|
76.1 in
|
|
Blade Weight
|
10587 lb
|
|
Blade Width (over end bits)
|
171.3 in
|
|
Ground Clearance at Full Lift
|
56 in
|
|
Maximum Digging Depth
|
23.9 in
|
|
Maximum Tilt
|
37 in
|
|
Note
|
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
|
|
Total Operating Weight* (with blade and single-shank ripper)
|
110205 lb
|
Blade - Universal
|
Blade Capacity (SAE J1265)
|
21.7 yd³
|
|
Blade Height
|
76.1 in
|
|
Blade Weight
|
12016 lb
|
|
Blade Width (over end bits)
|
184.3 in
|
|
Ground Clearance at Full Lift
|
56 in
|
|
Maximum Digging Depth
|
23.9 in
|
|
Maximum Tilt
|
39.9 in
|
|
Note
|
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
|
|
Total Operating Weight* (with blade and single-shank ripper)
|
111362 lb
|
Ripper - Single Shank
|
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
|
34.7 in
|
|
Maximum penetration depth (standard tip)
|
48.5 in
|
|
Maximum penetration force * (shank vertical)
|
35520 lbf
|
|
Note
|
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
|
|
Number of Pockets
|
1
|
|
Pryout Force
|
74637 lbf
|
|
Total Operating Weight* (with SU Blade and noted ripper)
|
110205 lb
|
|
Weight
|
10701 lb
|
Ripper - Single Shank, Deep Ripping
|
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
|
32.2 in
|
|
Maximum penetration depth (standard tip)
|
68 in
|
|
Maximum penetration force * (shank vertical)
|
38667 lbf
|
|
Note
|
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
|
|
Number of Pockets
|
1
|
|
Pryout Force
|
74412 lbf
|
|
Total Operating Weight* (with SU Blade and noted ripper)
|
110485 lb
|
|
Weight
|
10981 lb
|
Ripper - Multi-Shank, Adjustable Parallelogram
|
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
|
34.6 in
|
|
Maximum Penetration - Standard Tip
|
31.4 in
|
|
Maximum Penetration Force - Shank Vertical
|
34621 lbf
|
|
Note
|
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
|
|
Number of Pockets
|
3
|
|
Pry-Out Force - Multi-Shank Ripper with One Tooth
|
81156 lbf
|
|
Total Operating Weight* - With SU-Blade and Ripper
|
111739 lb
|
|
Weight
|
12136 lb
|
Winches
|
Drum Width
|
12.6 in
|
|
Maximum Drum Capacity - Optional Cable Length
|
204 ft
|
|
Maximum Drum Capacity - Recommended Cable Length
|
257 in
|
|
Note
|
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
|
|
Note (2)
|
Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
|
|
Oil Capacity
|
4 gal (US)
|
|
Weight*
|
3950 lb
|
|
Winch Model
|
PA 140VS
|
|
Wire Cable Diameter - Optional
|
1.25 ft
|
|
Wire Cable Diameter - Recommended
|
1.13 in
|
|
Wire Cable Ferrule Size - Length
|
2.8 in
|
|
Wire Cable Ferrule Size - Outside Diameter
|
2.4 in
|
Dimensions (Approximate)
|
Drawbar Height (Center of Clevis)*
|
30 in
|
|
Ground Clearance*
|
18.1 in
|
|
Height - FOPS Cab*
|
150.4 in
|
|
Height - ROPS/Canopy*
|
157.5 in
|
|
Height - Top of Stack*
|
152.6 in
|
|
Length - Basic Tractor - With Drawbar
|
206.4 in
|
|
Length - Basic Tractor - With Winch
|
218.3 in
|
|
Length - Track on Ground
|
136.6 in
|
|
Length - With Multi-Shank Ripper
|
257.4 in
|
|
Length - With SU-Blade**
|
259.9 in
|
|
Length - With Single-Shank Ripper
|
257 in
|
|
Length - With U-Blade
|
274.3 in
|
|
Note (1)
|
*Includes grouser height for total dimensions on hard surfaces.
|
|
Overall Length - Basic Tractor
|
193.3 in
|
|
Overall Length - SU-Blade/SS Ripper
|
323.6 in
|
|
Track Gauge
|
88.6 in
|
|
Width - Over Trunnions
|
130.3 in
|
|
Width - Without Trunnions - Standard Shoe
|
113 in
|
