Skip to content
14 Motor Grader

14 Motor Grader

Loaded With Power, Technology and Operator Features

More Comfort ‚Äď More Performance ‚Äď More Versatility

  • Move more with less fuel

    Eco Mode saves fuel while maintaining productivity.

  • Up To 78% Less Arm Movement

    Reduce fatigue from arm movement with joystick controls.

  • Integrated Technologies

    Using Cat¬ģ Grade technologies can increase your overall productivity with better accuracy, reduce rework, and lower costs.

Engine

Base Power (1st Gear) - Net 238 HP
Bore 5.1 in
Displacement 763 in³
Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Engine Model Cat C13
Maximum Altitude - Full Power 13900 ft
Maximum Altitude - Full Power (Tier 2) 12049 ft
Maximum Altitude - Full Power (Tier 3) 14349 ft
Maximum Torque - VHP Plus 1137 lb/ft
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (2) Optimized VHP Plus is standard for the 14M3.
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Number of Cylinders 6
Speed at Rated Power 1,850 rpm
Standard - Fan Speed - Maximum 1,600 rpm
Standard - Fan Speed - Minimum 550 rpm
Standard Capability 122 ¬įF
Stroke 6.2 in
Torque Rise 41%

Frame

Circle - Outer Diameter 71.7 in
Front Axle - Total Oscillation per Side 32¬į
Front Axle - Wheel Lean - Left/Right 17.1¬į

Service Refill Capacities

Circle Drive 1.8 gal (US)
Cooling System 15.9 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8 gal (US)
Fuel Tank 109.9 gal (US)
Hydraulic System 33 gal (US)
Transmission and Differential 23.5 gal (US)

Moldboard

Arc Radius 16.3 in
Blade Height - With Cutting Edge 24.9 in
Blade Height - Without Cutting Edge 23 in
Blade Width 14 ft
Blade Width - With End Bits 169 in
Blade Width - Without End Bits 164 in
Throat Clearance 4.6 in

Blade Range

Blade Tip Range - Backward 5¬į
Blade Tip Range - Forward 40¬į
Circle Centershift - Left 25.6 in
Circle Centershift - Right 20.5 in
Maximum Depth of Cut 23.3 in
Maximum Lift Above Ground 16.5 in
Maximum Shoulder Reach Outside of Tires - Left 73.6 in
Maximum Shoulder Reach Outside of Tires - Right 78.9 in
Moldboard Sideshift - Left 29.1 in
Moldboard Sideshift - Right 31.1 in

Weights

Gross Vehicle Weight - Base* - Front Axle 13994 lb
Gross Vehicle Weight - Base* - Rear Axle 36994 lb
Gross Vehicle Weight - Base* - Total 50980 lb
Gross Vehicle Weight - Typically Equipped - Front Axle 15245 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005 lb
Gross Vehicle Weight - Typically Equipped - Total 57250 lb
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Operating Weight - Typically Equipped 57250 lb

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Download resources

14 Key Features and Benefits
14 Product Brochure
Motor Grader Rig Out Catalog
14 Poster

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Untitled

Call us today: 1-877-778-2230
or  Send us a message