Skip to content
D2 Dozer

D2 Dozer

Work Looks Better from Here

More Comfort – More Performance – More Versatility

  • Easy to Operate

    GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.

  • Up to 10% Lower Total Ownership Cost

    with improved fuel economy, long undercarriage life and easy maintenance.

  • Up to 15% More Performance

    with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.

Engine

Displacement 220 inÂł
Engine Model Cat® C3.6
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 92 HP
Net Power - 2,200 rpm - SAE J1349 92 HP
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power - Net 92 HP

Engine 

Power Train  Hydrostatic

Weights

Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Operating Weight 18382 lb
Operating Weight - LGP 19066 lb

Weights 

Operating Weight 18382 lb

Cab

FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008

Transmission

Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h
Maximum Travel Speed - Reverse 6.2 mile/h
Relief Valve Settings 7033 psi
Track Motors 2

Undercarriage

Ground Pressure - LGP 4.3 psi
Length - Track on Ground - LGP 89 in
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Shoe Width - LGP 25 in
Shoe Width - Standard 18 in
Track Gauge 61 in
Track Gauge - LGP 68 in

Undercarriage 

Ground Pressure  5.7 psi
Length of Track on Ground  89 in
Number of Shoes - Each Side - Abrasion Undercarriage  38

Service Refill Capacities

Cooling System 5 gal (US)
Crankcase - With Filter 2.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
Final Drive - Each - LGP 2.6 gal (US)
Fuel Tank 51.5 gal (US)
Transmission - Hydraulic Tank 23.8 gal (US)

Service Refill Capacities 

Final Drives - Each Side  2.6 gal (US)

Hydraulic Controls

Pump Output 17.2 gal/min
Relief Valve Settings 2988 psi

Ripper

Height 6.5 in
Maximum Digging Depth 13.3 in
Maximum Ground Clearance Under Tip 17.6 in
Maximum Reach - Ground Line 30.2 in
Number of Shanks 3
Overall Width 67.3 in
Type Parallelogram
Weight 1222 lb

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: Blade Capacity (SAE) - LGP 2.42 ydÂł
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Height - LGP 35.8 in
BLADE: Blade Lift Height - LGP 27.9 in
BLADE: Blade Width - LGP 124 in
BLADE: Blade Width at Maximum Angle - LGP 113.1 in
BLADE: Digging Depth - LGP 23.2 in
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Maximum Tilt - LGP 17.2 in
Dozer Height - LGP 108.9 in
Dozer Height - Standard 108.9 in
Ground Clearance - LGP 13 in
Length of Basic Dozer (without blade) - LGP 129.5 in
Length of Basic Dozer (without blade) - Standard 129.5 in
Note Abrasion Undercarriage
Overall Length - With Blade - LGP 168.2 in
Track Gauge - LGP 67.9 in
Width of Dozer (standard shoes, no blade) - LGP 92.9 in
Width of Dozer (standard shoes, no blade) - Standard 79.1 in

Dimensions 

BLADE: Blade Capacity (SAE) - Standard  2.59 yd³
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
BLADE: Blade Height - Standard  39.8 in
BLADE: Blade Lift Height - Standard  29.3 in
BLADE: Blade Width - Standard  109.5 in
BLADE: Blade Width at Maximum Angle - Standard  100.1 in
BLADE: Digging Depth - Standard  23.3 in
BLADE: Maximum Angle (either side) - Standard  25°
BLADE: Maximum Tilt - Standard  15.2 in
Ground Clearance - Standard  13 in
Note  With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Overall Length - With Blade - Standard  168.5 in
Track Gauge - Standard  61 in

Retrieval Winch

Control Hydraulic
Drum Capacity - Optional Cable 195 ft
Drum Capacity - Recommended Cable 277 ft
Drum Diameter 8 in
Drum Width 9.65 in
Maximum Line Pull - Bare Drum 32150 lb
Maximum Line Pull - Full Drum 20350 lb
Maximum Line Speed - Bare Drum 50 ft/min
Maximum Line Speed - Full Drum 79 ft/min
Overall width 27.91 in
Rope Diameter - Optional 0.75 in
Rope Diameter - Recommended 0.63 in
Speed Variable
Throat Clearance 5.6 in
Weight 1747 lb
Winch Drive Hydraulic
Winch Length 35.63 in

High Performance Winch

Control Hydraulic
Drum capacity – optional 256 ft
Drum capacity – recommended cable 371 ft
Drum diameter 10 in
Drum width 10.8 in
Maximum line pull – bare drum 40000 lb
Maximum line pull – full drum 25000 lb
Maximum line speed – bare drum 131 ft/min
Maximum line speed – full drum 207 ft/min
Overall width 29.2 in
Rope diameter – optional 0.75 in
Rope diameter – recommended 0.63 in
Speed Variable
Throat clearance 6.75 in
Weight 1345 lb
Winch drive Hydrostatic
Winch length 27.76 in

Download resources

D2 Small Product Brochure
D2 Large Product Brochure
D1, D2, D3 Shiphold Product Brochure
D1, D2, D3 Fire Suppression Dozers Product Brochure (N Am, Aus-NZ)
Options and Accessories Kit Guide for Small Track Type Tractors

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Untitled

Call us today: 1-877-778-2230
or  Send us a message