Get a quoteD1 Dozer
Work Looks Better from Here
More Comfort ā More Performance ā More Versatility
-
Easy to Operate
GRADE with 3D and Slope Assistā¢ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
-
Up to 10% Lower Total Ownership Cost
with improved fuel economy, long undercarriage life and easy maintenance.
-
Up to 15% More Performance
with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
Engine
| Displacement | 220 inĀ³ |
| Engine Model | Cat C3.6 |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 80 hp |
| Net Power - 2,200 rpm - SAE J1349 | 80 hp |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Power - Net | 80 hp |
EngineĀ
| Power TrainĀ | Hydrostatic |
Weights
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Operating Weight | 17855 lb |
| Operating Weight - LGP | 18839 lb |
| Operating Weight - LGP, 762 mm/30 in | 19295 lb |
Cab
| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Transmission
| Drive Pumps | 1 |
| Maximum Travel Speed - Forward | 5.6 mile/h |
| Maximum Travel Speed - Reverse | 6.2 mile/h |
| Relief Valve Settings | 7033 psi |
| Track Motors | 2 |
Undercarriage
| Ground Pressure - LGP | 4.3 psi |
| Ground Pressure - LGP, 762 mm (30 in) | 3.7 psi |
| Length - Track on Ground - LGP | 89 in |
| Length - Track on Ground - LGP, 762 mm (30 in) | 89 in |
| Number of Rollers - Each Side | 6 |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Shoe Width - LGP | 25 in |
| Shoe Width - LGP, 762 mm (30 in) | 30 in |
| Shoe Width - Standard | 16 in |
| Track Gauge | 59 in |
| Track Gauge - LGP | 68 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
UndercarriageĀ
| Ground PressureĀ | 6.45 psi |
| Length of Track on GroundĀ | 89 in |
| Number of Shoes - Each Side - Abrasion UndercarriageĀ | 38 |
Service Refill Capacities
| Cooling System | 4.2 gal (US) |
| Crankcase - With Filter | 2.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9 gal (US) |
| Final Drive - Each - LGP | 2.6 gal (US) |
| Fuel Tank | 51.5 gal (US) |
| Transmission - Hydraulic Tank | 23.8 gal (US) |
Service Refill CapacitiesĀ
| Final Drives - Each SideĀ | 2.6 gal (US) |
Hydraulic Controls
| Pump Output | 17.2 gal/min |
| Relief Valve Settings | 2988 psi |
Ripper
| Height | 6.5 in |
| Maximum Digging Depth | 13.3 in |
| Maximum Ground Clearance Under Tip | 17.6 in |
| Maximum Reach - Ground Line | 30.2 in |
| Number of Shanks | 3 |
| Overall Width | 67.3 in |
| Type | Parallelogram |
| Weight | 1222 lb |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the ļ¬uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Dimensions
| BLADE: Blade Capacity (SAE) - LGP | 2.17 ydĀ³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52Ā° to 58Ā° |
| BLADE: Blade Height - LGP | 33.8 in |
| BLADE: Blade Lift Height - LGP | 28.7 in |
| BLADE: Blade Width - LGP | 124 in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1 in |
| BLADE: Digging Depth - LGP | 23 in |
| BLADE: Maximum Angle (either side) - LGP | 25Ā° |
| BLADE: Maximum Tilt - LGP | 17.2 in |
| Dozer Height - LGP | 108.9 in |
| Dozer Height - LGP, 762 mm (30 in) | 108.9 in |
| Dozer Height - Standard | 108.9 in |
| Ground Clearance - LGP | 13 in |
| Ground Clearance - LGP, 762 mm (30 in) | 13 in |
| Length of Basic Dozer (without blade) - LGP | 129.6 in |
| Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) | 129.6 in |
| Length of Basic Dozer (without blade) - Standard | 129.6 in |
| Note | *Abrasion Undercarriage |
| Overall Length - With Blade - LGP | 167.8 in |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 167.8 in |
| Track Gauge - LGP | 67.9 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
| Width of Dozer (standard shoes, no blade) - LGP | 92.9 in |
| Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | 94.9 in |
| Width of Dozer (standard shoes, no blade) - Standard | 74.8 in |
DimensionsĀ
| BLADE: Blade Capacity (SAE) - StandardĀ | 1.99 ydĀ³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - StandardĀ | 52Ā° to 58Ā° |
| BLADE: Blade Height - StandardĀ | 35.8 in |
| BLADE: Blade Lift Height - StandardĀ | 28.7 in |
| BLADE: Blade Width - StandardĀ | 104.2 in |
| BLADE: Blade Width at Maximum Angle - StandardĀ | 95.2 in |
| BLADE: Digging Depth - StandardĀ | 23.2 in |
| BLADE: Maximum Angle (either side) - StandardĀ | 25Ā° |
| BLADE: Maximum Tilt - StandardĀ | 14.5 in |
| Ground Clearance -Ā StandardĀ | 13 in |
| NoteĀ | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
| Overall Length - With Blade -Ā StandardĀ | 168 in |
| Track Gauge - StandardĀ | 58.9 in |
Retrieval Winch
| Control | Hydraulic |
| Drum Capacity - Optional Cable | 195 ft |
| Drum Capacity - Recommended Cable | 277 ft |
| Drum Diameter | 8 in |
| Drum Width | 9.65 in |
| Maximum Line Pull - Bare Drum | 50 ft/min |
| Maximum Line Pull - Full Drum | 79 ft/min |
| Maximum Line Speed - Bare Drum | 32150 lb |
| Maximum Line Speed - Full Drum | 20350 lb |
| Overall width | 27.91 in |
| Rope Diameter - Optional | 0.75 in |
| Rope Diameter - Recommended | 0.63 in |
| Speed | Variable |
| Throat Clearance | 5.6 in |
| Weight | 1747 lb |
| Winch Drive | Hydraulic |
| Winch Length | 35.63 in |
High Performance Winch
| Control | Hydraulic |
| Drum capacity ā optional | 256 ft |
| Drum capacity ā recommended cable | 371 ft |
| Drum diameter | 10 in |
| Drum width | 10.8 in |
| Maximum line pull ā bare drum | 40000 lb |
| Maximum line pull ā full drum | 25000 lb |
| Maximum line speed ā bare drum | 131 ft/min |
| Maximum line speed ā full drum | 207 ft/min |
| Overall width | 29.2 in |
| Rope diameter ā optional | 0.75 in |
| Rope diameter ā recommended | 0.63 in |
| Speed | Variable |
| Throat clearance | 6.75 in |
| Weight | 1345 lb |
| Winch drive | Hydrostatic |
| Winch length | 27.76 in |
Download resources
D1 Small Product Brochure
D1 Large Product Brochure
D1 SSLGP Small Product Brochure
D1, D2, D3 Fire Suppression Dozers Product Brochure (N Am, Aus-NZ)
D1 Mulcher Product Brochure
D1, D2, D3 Shiphold Product Brochure
Options and Accessories Kit Guide for Small Track Type Tractors
Get info about our financing options
Get The best solution for your job site needs
Let us help.
Engine
| Displacement | 220 inĀ³ |
| Engine Model | Cat C3.6 |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 80 hp |
| Net Power - 2,200 rpm - SAE J1349 | 80 hp |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Power - Net | 80 hp |
EngineĀ
| Power TrainĀ | Hydrostatic |
Weights
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Operating Weight | 17855 lb |
| Operating Weight - LGP | 18839 lb |
| Operating Weight - LGP, 762 mm/30 in | 19295 lb |
Cab
| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Transmission
| Drive Pumps | 1 |
| Maximum Travel Speed - Forward | 5.6 mile/h |
| Maximum Travel Speed - Reverse | 6.2 mile/h |
| Relief Valve Settings | 7033 psi |
| Track Motors | 2 |
Undercarriage
| Ground Pressure - LGP | 4.3 psi |
| Ground Pressure - LGP, 762 mm (30 in) | 3.7 psi |
| Length - Track on Ground - LGP | 89 in |
| Length - Track on Ground - LGP, 762 mm (30 in) | 89 in |
| Number of Rollers - Each Side | 6 |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Shoe Width - LGP | 25 in |
| Shoe Width - LGP, 762 mm (30 in) | 30 in |
| Shoe Width - Standard | 16 in |
| Track Gauge | 59 in |
| Track Gauge - LGP | 68 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
UndercarriageĀ
| Ground PressureĀ | 6.45 psi |
| Length of Track on GroundĀ | 89 in |
| Number of Shoes - Each Side - Abrasion UndercarriageĀ | 38 |
Service Refill Capacities
| Cooling System | 4.2 gal (US) |
| Crankcase - With Filter | 2.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9 gal (US) |
| Final Drive - Each - LGP | 2.6 gal (US) |
| Fuel Tank | 51.5 gal (US) |
| Transmission - Hydraulic Tank | 23.8 gal (US) |
Service Refill CapacitiesĀ
| Final Drives - Each SideĀ | 2.6 gal (US) |
Hydraulic Controls
| Pump Output | 17.2 gal/min |
| Relief Valve Settings | 2988 psi |
Ripper
| Height | 6.5 in |
| Maximum Digging Depth | 13.3 in |
| Maximum Ground Clearance Under Tip | 17.6 in |
| Maximum Reach - Ground Line | 30.2 in |
| Number of Shanks | 3 |
| Overall Width | 67.3 in |
| Type | Parallelogram |
| Weight | 1222 lb |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the ļ¬uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Dimensions
| BLADE: Blade Capacity (SAE) - LGP | 2.17 ydĀ³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52Ā° to 58Ā° |
| BLADE: Blade Height - LGP | 33.8 in |
| BLADE: Blade Lift Height - LGP | 28.7 in |
| BLADE: Blade Width - LGP | 124 in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1 in |
| BLADE: Digging Depth - LGP | 23 in |
| BLADE: Maximum Angle (either side) - LGP | 25Ā° |
| BLADE: Maximum Tilt - LGP | 17.2 in |
| Dozer Height - LGP | 108.9 in |
| Dozer Height - LGP, 762 mm (30 in) | 108.9 in |
| Dozer Height - Standard | 108.9 in |
| Ground Clearance - LGP | 13 in |
| Ground Clearance - LGP, 762 mm (30 in) | 13 in |
| Length of Basic Dozer (without blade) - LGP | 129.6 in |
| Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) | 129.6 in |
| Length of Basic Dozer (without blade) - Standard | 129.6 in |
| Note | *Abrasion Undercarriage |
| Overall Length - With Blade - LGP | 167.8 in |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 167.8 in |
| Track Gauge - LGP | 67.9 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
| Width of Dozer (standard shoes, no blade) - LGP | 92.9 in |
| Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | 94.9 in |
| Width of Dozer (standard shoes, no blade) - Standard | 74.8 in |
DimensionsĀ
| BLADE: Blade Capacity (SAE) - StandardĀ | 1.99 ydĀ³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - StandardĀ | 52Ā° to 58Ā° |
| BLADE: Blade Height - StandardĀ | 35.8 in |
| BLADE: Blade Lift Height - StandardĀ | 28.7 in |
| BLADE: Blade Width - StandardĀ | 104.2 in |
| BLADE: Blade Width at Maximum Angle - StandardĀ | 95.2 in |
| BLADE: Digging Depth - StandardĀ | 23.2 in |
| BLADE: Maximum Angle (either side) - StandardĀ | 25Ā° |
| BLADE: Maximum Tilt - StandardĀ | 14.5 in |
| Ground Clearance -Ā StandardĀ | 13 in |
| NoteĀ | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
| Overall Length - With Blade -Ā StandardĀ | 168 in |
| Track Gauge - StandardĀ | 58.9 in |
Retrieval Winch
| Control | Hydraulic |
| Drum Capacity - Optional Cable | 195 ft |
| Drum Capacity - Recommended Cable | 277 ft |
| Drum Diameter | 8 in |
| Drum Width | 9.65 in |
| Maximum Line Pull - Bare Drum | 50 ft/min |
| Maximum Line Pull - Full Drum | 79 ft/min |
| Maximum Line Speed - Bare Drum | 32150 lb |
| Maximum Line Speed - Full Drum | 20350 lb |
| Overall width | 27.91 in |
| Rope Diameter - Optional | 0.75 in |
| Rope Diameter - Recommended | 0.63 in |
| Speed | Variable |
| Throat Clearance | 5.6 in |
| Weight | 1747 lb |
| Winch Drive | Hydraulic |
| Winch Length | 35.63 in |
High Performance Winch
| Control | Hydraulic |
| Drum capacity ā optional | 256 ft |
| Drum capacity ā recommended cable | 371 ft |
| Drum diameter | 10 in |
| Drum width | 10.8 in |
| Maximum line pull ā bare drum | 40000 lb |
| Maximum line pull ā full drum | 25000 lb |
| Maximum line speed ā bare drum | 131 ft/min |
| Maximum line speed ā full drum | 207 ft/min |
| Overall width | 29.2 in |
| Rope diameter ā optional | 0.75 in |
| Rope diameter ā recommended | 0.63 in |
| Speed | Variable |
| Throat clearance | 6.75 in |
| Weight | 1345 lb |
| Winch drive | Hydrostatic |
| Winch length | 27.76 in |