Engine
Bore
|
5.4 in
|
Displacement
|
927.6 in³
|
Emissions
|
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
|
Engine Model
|
C15 Cat®
|
Engine Power - ISO 14396:2002
|
426 hp
|
Gross Power - SAE J1995:2014
|
435 hp
|
High Idle Speed
|
2300 r/min
|
Low Idle Speed
|
800 r/min
|
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
|
9098 ft
|
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
|
9298 ft
|
Net Power - ISO 9249:2007
|
405 hp
|
Net Power - SAE J1349:2011
|
405 hp
|
Note
|
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
|
Rated Speed
|
1800
|
Stroke
|
6.7 in
|
Torque Rise
|
33%
|
Operating Specifications
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
|
91549 lb
|
Maximum Operating Weight (Tier 4 Final/Stage V)
|
92568 lb
|
Operating Weight (Tier 3/Stage IIIA equivalent)
|
89186 lb
|
Operating Weight (Tier 4 Final/Stage V)
|
90207 lb
|
Transmission
Direct Drive - Forward 1
|
4.2 mile/h
|
Direct Drive - Forward 2
|
7.5 mile/h
|
Direct Drive - Reverse 1
|
4.3 mile/h
|
Direct Drive - Reverse 2
|
8.6 mile/h
|
Transmission Type
|
Planetary - Powershift - ECPC
|
Hydraulic System
Bore
|
4.7 in
|
Lift System
|
Double Acting Cylinder
|
Main Relief Pressure
|
3771 psi
|
Maximum Supply Pressure
|
3495 psi
|
Pump Flow at 1800 rpm
|
30.9 gal/min
|
Stroke
|
42.1 in
|
Service Refill Capacities
Cooling System
|
30.6 gal (US)
|
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
|
8.5 gal (US)
|
Differential - Final Drives - Front
|
26.4 gal (US)
|
Differential - Final Drives - Rear
|
29.1 gal (US)
|
Engine Crankcase
|
9 gal (US)
|
Fuel Tank
|
206.6 gal (US)
|
Hydraulic Tank Only
|
35.4 gal (US)
|
Note
|
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
|
Transmission
|
17.4 gal (US)
|
Axles
Front
|
Planetary - Fixed
|
Oscillation Angle
|
±5°
|
Rear
|
Planetary - Oscillating
|
Braking System
Parking Brake
|
Drum and Shoe, Spring Applied, Hydraulic Released
|
Service Brakes
|
Multi Disc Wet (Enclosed) 2 WHL
|
Sound Performance - Tier 4 Final / Stage V
Machine Sound Power Level (ISO 6395:2008)
|
113 dB(A)
|
Machine Sound Power Level (ISO 6395:2008)*
|
110 dB(A)
|
Note (1)
|
* Sound suppression equipped
|
Note (2)
|
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
|
Note (3)
|
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
|
Note (4)
|
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
|
Operator Sound Pressure Level (ISO 6396:2008)
|
73 dB(A)
|
Operator Sound Pressure Level (ISO 6396:2008)*
|
72 dB(A)
|
Sound Performance - Tier 3 / Stage IIIA
Machine Sound Power Level (ISO 6395:2008)
|
113 dB(A)
|
Machine Sound Power Level (ISO 6395:2008)*
|
110 dB(A)
|
Note (1)
|
* Sound suppression equipped
|
Note (2)
|
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
|
Note (3)
|
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
|
Note (4)
|
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
|
Operator Sound Pressure Level (ISO 6396:2008)
|
73 dB(A)
|
Operator Sound Pressure Level (ISO 6396:2008)*
|
72 dB(A)
|
Hydraulic System - Steering
Bore
|
4.5 in
|
Maximum System Flow
|
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
|
Steering Pressure Limited
|
3481 psi
|
Steering System - Circuit
|
Pilot operated, load sensing
|
Steering System - Pump
|
Piston - Variable Displacement
|
Stroke
|
22.7 in
|
Vehicle Articulation Angle
|
86 °
|
Dimensions (Approximate)
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
|
10.16 ft
|
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
|
9.38 ft
|
Ground Clearance
|
2.11 ft
|
Ground Clearance - Bumper
|
3.15 ft
|
Height - Cab Roof
|
13.75 ft
|
Height - Top of Beacon
|
15.63 ft
|
Height - Top of Exhaust Pipe
|
14.56 ft
|
Height - Top of Hood
|
10.87 ft
|
Height to Top of Air Conditioning Condenser
|
14.99 ft
|
Hitch to Centerline of Front Axle
|
6.07 ft
|
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
|
28.59 ft
|
Turning Radius - Inside of Wheels
|
9.18 ft
|
Wheel Base
|
12.14 ft
|
Width - Over Wheels
|
12.47 ft
|
Straight Blade
Capacity, Rated
|
16.1 yd³
|
Height with Cutting Edge and Screen
|
6.23 ft
|
Maximum Depth of Cut
|
1.5 ft
|
Maximum Lift above Ground
|
4.19 ft
|
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
|
28.59 ft
|
Width - Over End Bits
|
14.75 ft
|
Width – Moldboard Length
|
14.16 ft
|
Semi U-Blade
Capacity, Rated
|
20.9 yd³
|
Height with Cutting Edge and Screen
|
6.63 ft
|
Maximum Depth of Cut
|
2.03 ft
|
Maximum Lift above Ground
|
3.825 ft
|
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
|
29.54 ft
|
Width - Over End Bits
|
14.83 ft
|
Width – Moldboard Length
|
14.66 ft
|
U-Blade
Capacity, Rated
|
22.9 yd³
|
Height with Cutting Edge and Screen
|
6.62 ft
|
Maximum Depth of Cut
|
2.03 mm
|
Maximum Lift above Ground
|
3.79 ft
|
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
|
30.7 ft
|
Width - Over End Bits
|
14.41 ft
|
Width – Moldboard Length
|
14.25 ft
|
Wheels
Combination Tips (Weight Group)
|
21125 lb
|
Diamond Tips Weight (Group)
|
23997 lb
|
Drum Diameter
|
63.4 in
|
Drum Width
|
47.2 in
|
Feet Per Row
|
6
|
Feet Per Wheel
|
30
|
Outside Diameter
|
77.6 in
|
Outside Diameter - Diamond
|
78.1 in
|
Paddle Tips - Weight (Group)
|
20540 lb
|
Plus Tips - Weight (Group)
|
22002 lb
|
Replaceable
|
Weld On
|
Tip Height
|
179 mm
|
Tip Height - Diamond
|
7.25 in
|
Width Over Drums
|
3800 mm
|