Get a quote140 Motor Grader LVR
Get More Done Comfortably and Efficiently
More Comfort – More Performance – More Versatility
-
Lower maintenance costs
Extend typical maintenance intervals with the new filtration technology and grouped filters for easy access.
-
Cab Designed for comfort
Be productive and comfortable with steering wheel and lever controls and the ergonomically adjustable console and seat.
-
Material savings
Use less material with scalable Cat Grade technology solutions to increase accuracy and consistency.
Engine
| Bore | 4.5 in |
| Displacement | 567.5 in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat C9.3 |
| Engine RPM | 2,000 |
| Net Power - EEC 80/1269 | 250 hp |
| Net Power - ISO 9249/SAE J1349 | 250 hp |
| Number of Cylinders | 6 |
| Standard Capability | 109 °F |
| Stroke | 5.9 in |
| Torque Rise - ISO 9294 | 44% |
Weights
| Operating Weight - Typically Equipped | 44613 lb |
Moldboard
| Arc Radius | 16.3 in |
| Blade Width | 12 ft |
| Cutting Edge | 6 in |
| End Bit | 6 in |
| Throat Clearance | 6.5 in |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
Dimensions
| Basic Blade Width | 140 in |
| Length of Machine* | 397.6 in |
| Maximum Height | 132 in |
| Note | *Typically equipped with push block and ripper. |
| Width | 97.6 in |
Service Refill
| Circle Drive | 1.8 gal (US) |
| Engine Crankcase | 7.9 gal (US) |
| Front Wheel Spindle Bearing - Each | 0.13 gal (US) |
| Fuel Tank | 100 gal (US) |
| Hydraulic System | 14.5 gal (US) |
Machine Weight
| All-Wheel Drive (AWD) Weight | 44613 lb |
| Note | *Typically equipped with push block and ripper. |
Blade Range
| Maximum Depth of Cut | 28.9 in |
| Maximum Lift Above Ground | 18.9 in |
Get info about our financing options
Get The best solution for your job site needs
Let us help.
Engine
| Bore | 4.5 in |
| Displacement | 567.5 in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat C9.3 |
| Engine RPM | 2,000 |
| Net Power - EEC 80/1269 | 250 hp |
| Net Power - ISO 9249/SAE J1349 | 250 hp |
| Number of Cylinders | 6 |
| Standard Capability | 109 °F |
| Stroke | 5.9 in |
| Torque Rise - ISO 9294 | 44% |
Weights
| Operating Weight - Typically Equipped | 44613 lb |
Moldboard
| Arc Radius | 16.3 in |
| Blade Width | 12 ft |
| Cutting Edge | 6 in |
| End Bit | 6 in |
| Throat Clearance | 6.5 in |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
Dimensions
| Basic Blade Width | 140 in |
| Length of Machine* | 397.6 in |
| Maximum Height | 132 in |
| Note | *Typically equipped with push block and ripper. |
| Width | 97.6 in |
Service Refill
| Circle Drive | 1.8 gal (US) |
| Engine Crankcase | 7.9 gal (US) |
| Front Wheel Spindle Bearing - Each | 0.13 gal (US) |
| Fuel Tank | 100 gal (US) |
| Hydraulic System | 14.5 gal (US) |
Machine Weight
| All-Wheel Drive (AWD) Weight | 44613 lb |
| Note | *Typically equipped with push block and ripper. |
Blade Range
| Maximum Depth of Cut | 28.9 in |
| Maximum Lift Above Ground | 18.9 in |