fbpx
Skip to content
D3 Track-Type Tractor

D3 Track-Type Tractor

Work Looks Better from Here

Get a quote

More Comfort ā€“ More Performance ā€“ More Versatility

  • Easy to Operate

    GRADE with 3D and Slope Assistā„¢ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.

  • Up to 10% Lower Total Ownership Cost

    with improved fuel economy, long undercarriage life and easy maintenance.

  • Up to 15% More Performance

    with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.

Engine

Displacement 220 inĀ³
Engine Model CatĀ® C3.6
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp
Net Power - 2,200 rpm - SAE J1349 104 hp
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬‚ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power - Net 104 hp

EngineĀ 

Power TrainĀ  Hydrostatic

Weights

Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Operating Weight 20639.68 lb
Operating Weight 20640 lb
Operating Weight - LGP 21369 lb
Operating Weight - LGP, 762 mm/30 in 21810 lb

Cab

FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008

Transmission

Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h
Maximum Travel Speed - Reverse 6.2 mile/h
Relief Valve Settings 7033 psi
Track Motors 2

Undercarriage

Ground Pressure - LGP 4.5 psi
Ground Pressure - LGP, 762 mm (30 in) 3.9 psi
Length - Track on Ground - LGP 91 in
Length - Track on Ground - LGP, 762 mm (30 in) 91 in
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
Shoe Width - LGP 26 in
Shoe Width - LGP, 762 mm (30 in) 30 in
Shoe Width - Standard 20 in
Track Gauge 63 in
Track Gauge - LGP 69 in
Track Gauge - LGP, 762 mm (30 in) 73 in

UndercarriageĀ 

Ground PressureĀ  5.7 psi
Length of Track on GroundĀ  91 in
Number of Shoes - Each Side - Abrasion UndercarriageĀ  36

Service Refill Capacities

Cooling System 5 gal (US)
Crankcase - With Filter 2.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
Final Drive - Each - LGP 2.6 gal (US)
Fuel Tank 51.5 gal (US)
Transmission - Hydraulic Tank 23.8 gal (US)

Service Refill CapacitiesĀ 

Final Drives - Each SideĀ  2.6 gal (US)

Hydraulic Controls

Pump Output 17.2 gpm
Relief Valve Settings 2988 psi

Ripper

Height 6.5 in
Maximum Digging Depth 13.3 in
Maximum Ground Clearance Under Tip 17.6 in
Maximum Reach - Ground Line 30.2 in
Number of Shanks 3
Overall Width 67.3 in
Type Parallelogram
Weight 1222 lb

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.0 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons).

Dimensions

BLADE: Blade Capacity (SAE) - LGP 3.06 ydĀ³
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52Ā° to 58Ā°
BLADE: Blade Height - LGP 39.8 in
BLADE: Blade Lift Height - LGP 30.2 in
BLADE: Blade Width - LGP 126.7 in
BLADE: Blade Width at Maximum Angle - LGP 115.8 in
BLADE: Digging Depth - LGP 23.2 in
BLADE: Maximum Angle (either side) - LGP 25Ā°
BLADE: Maximum Tilt - LGP 17.7 in
Dozer Height - LGP 109 in
Dozer Height - LGP, 762 mm (30 in) 109 in
Dozer Height - Standard 109 in
Ground Clearance - LGP 13 in
Ground Clearance - LGP, 762 mm (30 in) 13 in
Length of Basic Dozer (without blade) - LGP 128.7 in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in
Length of Basic Dozer (without blade) - Standard 128.7 in
Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Overall Length - With Blade - LGP 169.6 in
Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in
Track Gauge - LGP 67.9 in
Track Gauge - LGP, 762 mm (30 in) 73 in
Width of Dozer (standard shoes, no blade) - LGP 94.9 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in
Width of Dozer (standard shoes, no blade) - Standard 83 in

DimensionsĀ 

BLADE: Blade Capacity (SAE) - StandardĀ  2.86 ydĀ³
BLADE: Blade Cutting Edge Angle, Adjustable - StandardĀ  52Ā° to 58Ā°
BLADE: Blade Height - StandardĀ  42.2 in
BLADE: Blade Lift Height - StandardĀ  30.2 in
BLADE: Blade Width - StandardĀ  109.5 in
BLADE: Blade Width at Maximum Angle - StandardĀ  103.8 in
BLADE: Digging Depth - StandardĀ  23.8 in
BLADE: Maximum Angle (either side) - StandardĀ  25Ā°
BLADE: Maximum Tilt - StandardĀ  15.8 in
Ground Clearance -Ā StandardĀ  13 in
NoteĀ  Abrasion Undercarriage
Overall Length - With Blade -Ā StandardĀ  170.7 in
Track Gauge - StandardĀ  63 in

Retrieval Winch

Control Hydraulic
Drum Capacity - Optional Cable 195 ft
Drum Capacity - Recommended Cable 277 ft
Drum Diameter 8 in
Drum Width 9.65 in
Maximum Line Pull - Bare Drum 32150 lb
Maximum Line Pull - Full Drum 20350 lb
Maximum Line Speed - Bare Drum 50 ft/min
Maximum Line Speed - Full Drum 79 ft/min
Overall width 27.91 in
Rope Diameter - Optional 0.75 in
Rope Diameter - Recommended 0.63 in
Speed Variable
Throat Clearance 5.6 in
Weight 1747 lb
Winch Drive Hydraulic
Winch Length 35.63 in

High Performance Winch

Control Hydraulic
Drum capacity ā€“ optional 256 ft
Drum capacity ā€“ recommended cable 371 ft
Drum diameter 10 in
Drum width 10.8 in
Maximum line pull ā€“ bare drum 40000 lb
Maximum line pull ā€“ full drum 25000 lb
Maximum line speed ā€“ bare drum 131 ft/min
Maximum line speed ā€“ full drum 207 ft/min
Overall width 29.2 in
Rope diameter ā€“ optional 0.75 in
Rope diameter ā€“ recommended 0.63 in
Speed Variable
Throat clearance 6.75 in
Weight 1345 lb
Winch drive Hydrostatic
Winch length 27.76 in

Download resources

D3 Small Product Brochure
Download
D3 Large Product Brochure
Download
D1, D2, D3 Fire Suppression Dozers Product Brochure (N Am, Aus-NZ)
Download
D1, D2, D3 Shiphold Product Brochure
Download
Options and Accessories Kit Guide for Small Track Type Tractors
Download

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Address

Engine

Displacement 220 inĀ³
Engine Model CatĀ® C3.6
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp
Net Power - 2,200 rpm - SAE J1349 104 hp
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ļ¬‚ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power - Net 104 hp

EngineĀ 

Power TrainĀ  Hydrostatic

Weights

Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Operating Weight 20639.68 lb
Operating Weight 20640 lb
Operating Weight - LGP 21369 lb
Operating Weight - LGP, 762 mm/30 in 21810 lb

Cab

FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008

Transmission

Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h
Maximum Travel Speed - Reverse 6.2 mile/h
Relief Valve Settings 7033 psi
Track Motors 2

Undercarriage

Ground Pressure - LGP 4.5 psi
Ground Pressure - LGP, 762 mm (30 in) 3.9 psi
Length - Track on Ground - LGP 91 in
Length - Track on Ground - LGP, 762 mm (30 in) 91 in
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
Shoe Width - LGP 26 in
Shoe Width - LGP, 762 mm (30 in) 30 in
Shoe Width - Standard 20 in
Track Gauge 63 in
Track Gauge - LGP 69 in
Track Gauge - LGP, 762 mm (30 in) 73 in

UndercarriageĀ 

Ground PressureĀ  5.7 psi
Length of Track on GroundĀ  91 in
Number of Shoes - Each Side - Abrasion UndercarriageĀ  36

Service Refill Capacities

Cooling System 5 gal (US)
Crankcase - With Filter 2.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
Final Drive - Each - LGP 2.6 gal (US)
Fuel Tank 51.5 gal (US)
Transmission - Hydraulic Tank 23.8 gal (US)

Service Refill CapacitiesĀ 

Final Drives - Each SideĀ  2.6 gal (US)

Hydraulic Controls

Pump Output 17.2 gpm
Relief Valve Settings 2988 psi

Ripper

Height 6.5 in
Maximum Digging Depth 13.3 in
Maximum Ground Clearance Under Tip 17.6 in
Maximum Reach - Ground Line 30.2 in
Number of Shanks 3
Overall Width 67.3 in
Type Parallelogram
Weight 1222 lb

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.0 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons).

Dimensions

BLADE: Blade Capacity (SAE) - LGP 3.06 ydĀ³
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52Ā° to 58Ā°
BLADE: Blade Height - LGP 39.8 in
BLADE: Blade Lift Height - LGP 30.2 in
BLADE: Blade Width - LGP 126.7 in
BLADE: Blade Width at Maximum Angle - LGP 115.8 in
BLADE: Digging Depth - LGP 23.2 in
BLADE: Maximum Angle (either side) - LGP 25Ā°
BLADE: Maximum Tilt - LGP 17.7 in
Dozer Height - LGP 109 in
Dozer Height - LGP, 762 mm (30 in) 109 in
Dozer Height - Standard 109 in
Ground Clearance - LGP 13 in
Ground Clearance - LGP, 762 mm (30 in) 13 in
Length of Basic Dozer (without blade) - LGP 128.7 in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in
Length of Basic Dozer (without blade) - Standard 128.7 in
Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Overall Length - With Blade - LGP 169.6 in
Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in
Track Gauge - LGP 67.9 in
Track Gauge - LGP, 762 mm (30 in) 73 in
Width of Dozer (standard shoes, no blade) - LGP 94.9 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in
Width of Dozer (standard shoes, no blade) - Standard 83 in

DimensionsĀ 

BLADE: Blade Capacity (SAE) - StandardĀ  2.86 ydĀ³
BLADE: Blade Cutting Edge Angle, Adjustable - StandardĀ  52Ā° to 58Ā°
BLADE: Blade Height - StandardĀ  42.2 in
BLADE: Blade Lift Height - StandardĀ  30.2 in
BLADE: Blade Width - StandardĀ  109.5 in
BLADE: Blade Width at Maximum Angle - StandardĀ  103.8 in
BLADE: Digging Depth - StandardĀ  23.8 in
BLADE: Maximum Angle (either side) - StandardĀ  25Ā°
BLADE: Maximum Tilt - StandardĀ  15.8 in
Ground Clearance -Ā StandardĀ  13 in
NoteĀ  Abrasion Undercarriage
Overall Length - With Blade -Ā StandardĀ  170.7 in
Track Gauge - StandardĀ  63 in

Retrieval Winch

Control Hydraulic
Drum Capacity - Optional Cable 195 ft
Drum Capacity - Recommended Cable 277 ft
Drum Diameter 8 in
Drum Width 9.65 in
Maximum Line Pull - Bare Drum 32150 lb
Maximum Line Pull - Full Drum 20350 lb
Maximum Line Speed - Bare Drum 50 ft/min
Maximum Line Speed - Full Drum 79 ft/min
Overall width 27.91 in
Rope Diameter - Optional 0.75 in
Rope Diameter - Recommended 0.63 in
Speed Variable
Throat Clearance 5.6 in
Weight 1747 lb
Winch Drive Hydraulic
Winch Length 35.63 in

High Performance Winch

Control Hydraulic
Drum capacity ā€“ optional 256 ft
Drum capacity ā€“ recommended cable 371 ft
Drum diameter 10 in
Drum width 10.8 in
Maximum line pull ā€“ bare drum 40000 lb
Maximum line pull ā€“ full drum 25000 lb
Maximum line speed ā€“ bare drum 131 ft/min
Maximum line speed ā€“ full drum 207 ft/min
Overall width 29.2 in
Rope diameter ā€“ optional 0.75 in
Rope diameter ā€“ recommended 0.63 in
Speed Variable
Throat clearance 6.75 in
Weight 1345 lb
Winch drive Hydrostatic
Winch length 27.76 in

Call us today: 1-877-778-2230
orĀ  Send us a message