907M Compact Wheel Loader - Rental

Request a Rental
Download Brochure

Representative Size Class. Model may vary based on availability and location.

The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Engine

Maximum Gross Power
73 HP
Net Power
74 HP
Emissions
*The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards.
Engine Model
Cat® C3.3B DIT*
Maximum Gross Power - ISO 14396
73.2 HP
Rated Net Power - 2,400 rpm - SAE J1349
71.9 HP
Stroke
4.7 in
Note (5)
The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Note (4)
Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (2)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (1)
Net power ratings are tested at the reference conditions for the specified standard.
Maximum Gross Torque - ISO 14396
192 ft·lbf
Bore
3.7 in
Displacement
201 in³
Note (6)
Stage V engine available for Europe only.
Maximum Gross Power - ISO 14396 (metric)
74.2 HP
Rated Net Power - ISO 9249
72.9 HP

Weights

Operating Weight
12677 lb
Note
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured

Operating Specifications

Rated Bucket Capacity
1.31 yd³
Clearance - Full Lift and 45° Dump
7.97 ft
Full Turn Tipping Load
7716 lb
Reach - Full Lift and 45° Dump
2.6 ft
Steering Articulation Angle - Each Direction
39°
Tipping Load - Full Turn - ISO 14397-1
7339 lb
Tipping Load - Straight - ISO 14397-1
9007 lb

Cab

ROPS
ROPS: ISO 3471:2008
FOPS
FOPS: ISO 3449:2005 Level II
Note (2)
The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditi
Note (1)
Cat Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)
*The measurements were conducted with the cab doors and windows closed.

Service Refill Capacities

Engine Crankcase
3 gal (US)
Fuel Tank
20.6 gal (US)
Transmission - Gear Box
2.2 gal (US)
Axles - Rear
N/A
Axles - Front
N/A
Hydraulic Tank
12.2 gal (US)
Cooling System
4.5 gal (US)
Hydraulic System - Including Tank
18.5 gal (US)

Loader Hydraulic System

3rd Function Maximum Working Pressure
3408 psi
Maximum Flow - Implement Pump
19 gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow
31 gal/min
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow
19 gal/min
Maximum Working Pressure - Implement Pump
3408 psi
Relief Pressure - Tilt Cylinder Head
4496 psi
Relief Pressure - Tilt Cylinder Rod
2756 psi
Tilt Cylinder, Double Acting - Stroke
16.4 in
Tilt Cylinder, Double Acting - Rod Diameter
2.2 in
Tilt Cylinder, Double Acting - Bore Diameter
3.5 in
Lift Cylinder, Double Acting - Stroke
27.4 in
Lift Cylinder, Double Acting - Rod Diameter
2 in
Lift Cylinder, Double Acting - Bore Diameter
3 in
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time
9.6 s
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift
5.5 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level
2.6 s
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height
1.5 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift
9.6 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level
2.6 s
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height
3 s
Boost Flow Maximum Pressure
3191 psi

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Articulation Angle
39°
Width - Tread Center
4.58 ft
Width - Bucket
6.67 ft
Turning Radius - Over Bucket
14.67 ft
Turning Radius - Inside of Tires
7.33 ft
Reach - Bucket at 45°*
2.33 ft
Operating Weight
12913 lb
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Note (2)
**Vary with tire.
Note (1)
*Vary with bucket.
Machine Width
6 ft
Length - Wheel Base
7.08 ft
Length - Overall*
17.92 ft
Height - Ground Clearance**
11 in
Height - Ground to Cab**
8.42 ft
Height - Bucket Pin**
10.58 ft
Dump Angle at Full Lift
45°
Dig Depth**
3.7 in
Departure Angle
33°
Clearance - Level Bucket**
9.92 ft
Clearance - Bucket at 45° *
8.08 ft

Tires

Option (6)
405/70 R18 SPT9 Dunlop*
Option (7)
12.5/80 R18 Flexport™
Option (5)
340/80 R18 Bibload Michelin
Option (4)
340/80 R18 TRI2 Nokian
Option (3)
340/80 R18 XMCL Michelin
Option (2)
340/80 R18 AT-R Firestone
Option (1)
335/80 R18 XZSL Michelin
Note (4)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (3)
In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (2)
Other tire choices available, contact your Cat dealer for details.
Note (1)
*Standard tire.

Steering

Steering Cylinder, Double Acting - Stroke
11.8 in
Steering Cylinder, Double Acting - Rod Diameter
1.4 in
Steering Cylinder, Double Acting - Bore Diameter
3.1 in
Steering Articulation Angle - Each Direction
39°
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm
3 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
<6 turns
Maximum Working Pressure - Steering Pump
3191 psi
Nominal Flow - Steering Pump
12 gal/min
Maximum Steering Torque - 39° (Full Turn)
27747 ft·lbf
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf

Drive Train

Reverse - Range 2
12 mile/h
Reverse - High Range
22 mile/h
Reverse - Range 1
6 mile/h
Forward - Range 2
12 mile/h
Forward - Range 1
6 mile/h
Forward - High Range
22 mile/h

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Width - Tread Center
4.58 ft
Width - Bucket
6.67 ft
Turning Radius - Over Bucket
14.67 ft
Turning Radius - Inside of Tires
7.33 ft
Reach - Bucket at 45°*
2.67 ft
Operating Weight
12913 lb
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Note (2)
**Vary with tire.
Note (1)
*Vary with bucket.
Machine Width
6 ft
Length - Wheel Base
7.08 ft
Length - Overall*
18.42 ft
Height - Ground to Cab**
8.42 ft
Height - Ground Clearance**
11 in
Height - Bucket Pin**
10.58 ft
Dump Angle at Full Lift
45°
Dig Depth**
4.2 in
Departure Angle
33°
Clearance - Level Bucket**
9.92 ft
Clearance - Bucket at 45° *
7.67 ft
Articulation Angle
39°

Buckets

Light Material
1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
Multi-Purpose
0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Grapple
0.9 m³ (1.2 yd³) heaped
Note
All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
General Purpose
0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Bucket Capacities - ISO Coupler
0.75-1.5 m3
Bucket Capacities - SSL Style Coupler
1.0-2.0 yd3