Skip to content
990K Wheel Loader

990K Wheel Loader

Raising the bar for productivity and power

More Comfort – More Performance – More Versatility

  • UP TO 54% BETTER FUEL EFFICIENCY

    Move more material with less fuel using economy mode

  • UP TO 10% LOWER MAINTENANCE COST

    Make regular maintenance more convenient with grouped service points

  • UP TO 10% MORE PRODUCTIVITY

    Deliver more productivity in most truck loading applications while using performance series buckets with increased capacities

Operating Specifications

Bucket Capacity Range 8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³)
Cat Truck Match - High Lift 775-777
Cat Truck Match - Standard 773-775
Operating Weight 178517 lb
Rated Payload - High Lift (Quarry Face) 17.5 ton (US)
Rated Payload - Loose Material (High Lift) 22 ton (US)
Rated Payload - Loose Material (Standard) 20 ton (US)
Rated Payload - Standard (Quarry Face) 17.5 ton (US)

Engine

Bore 5.4 in
Displacement 1649.5 inÂł
Emissions U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Engine Model C27 Cat®
Gross - ISO 14396 752 HP
Net Power 699 HP
Net Power - SAE J1349 699 HP
Peak Torque - 1,200 rpm 2624 lb/ft
Rated Speed 1,800/min
Rated Speed - Gross - ISO 14396 752 HP
Rated Speed - Gross - SAE J1995 766 HP
Rated Speed - Net Power - SAE J1349 - High Ambient 648 HP
Rated Speed - Net Power - SAE J1349 - Standard Ambient 699 HP
Stroke 6 in
Torque Rise 18 %

Buckets

Bucket Capacities 7,4-14,9 mÂł (9,7-19,5 ydÂł)

Transmission

Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 8.5 mile/h
Direct Drive - Forward 3 15.2 mile/h
Direct Drive - Reverse 1 5.4 mile/h
Direct Drive - Reverse 2 9.6 mile/h
Direct Drive - Reverse 3 16.4 mile/h
Forward - 1 4.5 mile/h
Forward - 2 8.3 mile/h
Forward - 3 14.2 mile/h
Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Reverse - 1 4.9 mile/h
Reverse - 2 9.1 mile/h
Reverse - 3 15.5 mile/h
Transmission Type Cat-Planetenlastschaltgetriebe

Axles

Front Fixed
Oscillation Angle 8.5°
Rear Trunnion

Hydraulic Cycle Times

Dump 2.9 s
Lower 3.7 s
Lower Float Down 3.6 s
Rack Back 4.3 s
Raise 8.2 s
Total Hydraulic Cycle Time - Empty Bucket 13.8 s

Service Refill Capacities

Cooling System 54.9 gal (US)
Differential - Final Drives - Front 71.6 gal (US)
Differential - Final Drives - Rear 68.9 gal (US)
Engine Crankcase 20 gal (US)
Fuel Tank 294.3 gal (US)
Hydraulic System Factory Fill 210 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan 68.9 gal (US)
Hydraulic Tank - Steering and Braking 34.9 gal (US)
Note All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Transmission 29.1 gal (US)

Hydraulic System - Lift/Tilt

Cylinders, Double Acting - Lift, Bore and Stroke 235 mm Ă— 1287 mm (9.3 in Ă— 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke 292.1 mm Ă— 820 mm (11.5 in Ă— 32.3 in)
Lift/Tilt System Variable displacement piston
Lift/Tilt System - Circuit Positive flow control
Maximum Flow at 1,800 rpm (1) 216 gal/min
Maximum Flow at 1,800 rpm (2) 22.2 gal/min
Pilot System Open loop and pressure reducing
Relief Valve Setting - Lift/Tilt 4786 psi
Relief Valve Setting - Main 507 psi

Sound Performance - Suppression

Machine Sound Level (ISO 6395:2008) 113 dB(A)
Operator Sound Level (ISO 6396:2008) 69 dB(A)

Sound Performance - Standard

Machine Sound Level (ISO 6395:2008) 115 dB(A)
Operator Sound Level (ISO 6396:2008) 69 dB(A)

Hydraulic System - Steering

Maximum Flow at 1,400 rpm 94.5 gal/min
Relief Valve Setting - Steering 4641 psi
Steering ISO 5010: 2007
Steering System - Circuit Pilot, load sensing
Steering System - Pump Piston, variable displacement
Total Steering Angle 70°

Operator's Cab

ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Brakes

Brakes ISO 3450: 2011

Download resources

990K Product Brochure

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Untitled

Related Products

2738mm (108in) Logging Fork
2738mm (108in) Logging Fork
9.2mÂł (12ydÂł) Slag Bucket for Wheel Loaders
9.2mÂł (12ydÂł) Slag Bucket for Wheel Loaders
8.6mÂł (11.25ydÂł) Performance Series Heavy Duty Granite Bucket for Wheel Loaders
8.6mÂł (11.25ydÂł) Performance Series Heavy Duty Granite Bucket for Wheel Loaders
7mÂł (9.2ydÂł) Iron Ore Bucket for Wheel Loaders
7mÂł (9.2ydÂł) Iron Ore Bucket for Wheel Loaders
13.4mÂł (17.5ydÂł) Performance Series Coal Buckets for Wheel Loaders
13.4mÂł (17.5ydÂł) Performance Series Coal Buckets for Wheel Loaders

Call us today: 1-877-778-2230
or  Send us a message