930M Aggregate Handler Small Wheel Loader

Request a Free Quote
Download Brochure
Available to Rent

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine

Maximum Gross Power
168 HP
Bore
4 in
Stroke
5 in
Displacement
427 in³
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 HP
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*)
572 ft·lbf
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP
Maximum Rated Gross Power - ISO 14396 (metric)
170 HP
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 HP
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
588 ft·lbf
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
Engine Model
Cat® C7.1
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
Maximum Rated Gross Power - ISO 14396
168 HP
Net Power (Standard Power Mode: Range 1-3*)
1600 r/min
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
Net Power (Performance Power Mode: Range 1-4)
1800 r/min

Weights

Operating Weight
31848 lb
Operating Weight (2)
14 446 kg (31,848 lb)~
Operating Weight (1)
14 374 kg (31,689 lb)**
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Buckets

Bucket Capacities
2.5-5.0 m3 (3.3-6.5 yd3)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Note (1)
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Declared Sound Levels
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*

Service Refill Capacities

Transmission - Gear Box
2.2 gal (US)
Rear Axles
6.6 gal (US)
Hydraulic Tank
23.8 gal (US)
Hydraulic System - Including Tank
43.6 gal (US)
Front Axles
6.9 gal (US)
Engine Crankcase
5.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Cooling System
7.9 gal (US)
Fuel Tank
51.5 Gal

Power Train

Rear Axle - Traction Aid - Optional
Limited slip differential
Rear Axle
Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Note (2)
Offset rims available to meet European roading requirements.
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Brakes - Parking
Spring applied hydraulically released
Front Axle - Traction Aid*
Locking differential (standard)

Loader Hydraulic System

Tilt Cylinder, Double Acting - Rod Diameter
3.5 in
Tilt Cylinder, Double Acting - Stroke
21.9 in
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in
Relief Pressure - Tilt Cylinder
4061 psi
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Working Pressure - Implement Pump
3771 psi
Maximum Flow - Implement Pump
50 gal/min
Lift Cylinder, Double Acting - Rod Diameter
2.6 in
Lift Cylinder, Double Acting - Stroke
28.7 in
Lift Cylinder, Double Acting - Bore Diameter
4.7 in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min

Operating Specifications

Full Turn Tip Load (1)
9203 kg (20,289 lb)**
Full Turn Tip Load (2)
9302 kg (20,507 lb)~
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Steering

Maximum Flow - Steering Pump
34 gal/min
Maximum Working Pressure - Steering Pump
3500 psi
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
Steering Cylinder, Double Acting - Stroke
17.2 in

Transmission

Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
Forward and Reverse - Range 3
17 mile/h
Forward and Reverse - Range 4
25 mile/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).