907M Compact Wheel Loader

Engine

Maximum Gross Power

73 HP

Net Power

74 HP

Emissions

*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.

Engine Model

Cat® C3.3B DIT*

Maximum Gross Power - ISO 14396

73 HP

Maximum Gross Power - SAE J1995

74 HP

Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269

74 HP

Rated Net Power - 2,400 rpm - SAE J1349

73 HP

Stroke

4.7 in

Note (5)

The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.

Note (4)

Flywheel per the SAE reference conditions with the fan at maximum speed.

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note (2)

Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.

Note (1)

Net power ratings are tested at the reference conditions for the specified standard.

Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269

191 ft·lbf

Maximum Gross Torque - ISO 14396

192 ft·lbf

Bore

3.7 in

Displacement

201 in³

Note (6)

Stage V engine available for Europe only.

Maximum Gross Power - DIN ISO 14396

74 HP

Weights

Operating Weight

12677 lb

Note

Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured

Buckets

Bucket Capacities

0.75-1.5 m3 (1.0-2.0 yd3)

Light Material

1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)

Multi-Purpose

0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)

Grapple

0.9 m³ (1.2 yd³) heaped

Note

All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

General Purpose

0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)

Operating Specifications

Rated Bucket Capacity

1.31 yd³

Clearance - Full Lift and 45° Dump

7.97 ft

Full Turn Tipping Load

7716 lb

Reach - Full Lift and 45° Dump

2.6 ft

Steering Articulation Angle - Each Direction

39°

Tipping Load - Full Turn - ISO 14397-1

7339 lb

Tipping Load - Straight - ISO 14397-1

9007 lb

Cab

ROPS

SAE J1040 MAY94, ISO 3471-1994.

FOPS

SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.

Note (2)

When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A

Note (1)

Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Service Refill Capacities

Cooling System

4.5 gal (US)

Engine Crankcase

3 gal (US)

Fuel Tank

20.6 gal (US)

Hydraulic System - Including Tank

18.5 gal (US)

Transmission - Gear Box

2.2 gal (US)

Hydraulic Tank

12.2 gal (US)

Axles - Rear

N/A

Axles - Front

N/A

Loader Hydraulic System

3rd Function Maximum Working Pressure

3408 psi

Maximum Flow - Implement Pump

19 gal/min

Maximum Flow - Implement Pump - Auxiliary Function High Flow

31 gal/min

Maximum Flow - Implement Pump - Auxiliary Function Standard Flow

19 gal/min

Maximum Working Pressure - Implement Pump

3408 psi

Relief Pressure - Tilt Cylinder Head

4496 psi

Relief Pressure - Tilt Cylinder Rod

2756 psi

Tilt Cylinder, Double Acting - Stroke

16.4 in

Tilt Cylinder, Double Acting - Rod Diameter

2.2 in

Tilt Cylinder, Double Acting - Bore Diameter

3.5 in

Lift Cylinder, Double Acting - Stroke

27.4 in

Lift Cylinder, Double Acting - Rod Diameter

2 in

Lift Cylinder, Double Acting - Bore Diameter

3 in

Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time

9.6 s

Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift

5.5 s

Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level

2.6 s

Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height

1.5 s

Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift

9.6 s

Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level

2.6 s

Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height

3 s

Boost Flow Maximum Pressure

3191 psi

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Articulation Angle

39°

Width - Tread Center

4.58 ft

Width - Bucket

6.67 ft

Turning Radius - Over Bucket

14.67 ft

Turning Radius - Inside of Tires

7.33 ft

Reach - Bucket at 45°*

2.33 ft

Operating Weight

12913 lb

Note (3)

Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Note (2)

**Vary with tire.

Note (1)

*Vary with bucket.

Machine Width

6 ft

Length - Wheel Base

7.08 ft

Length - Overall*

17.92 ft

Height - Ground Clearance**

11 in

Height - Ground to Cab**

8.42 ft

Height - Bucket Pin**

10.58 ft

Dump Angle at Full Lift

45°

Dig Depth**

3.7 in

Departure Angle

33°

Clearance - Level Bucket**

9.92 ft

Clearance - Bucket at 45° *

8.08 ft

Tires

Option (6)

405/70 R18 SPT9 Dunlop*

Option (7)

12.5/80 R18 Flexport™

Option (5)

340/80 R18 Bibload Michelin

Option (4)

340/80 R18 TRI2 Nokian

Option (3)

340/80 R18 XMCL Michelin

Option (2)

340/80 R18 AT-R Firestone

Option (1)

335/80 R18 XZSL Michelin

Note (4)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (3)

In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.

Note (2)

Other tire choices available, contact your Cat dealer for details.

Note (1)

*Standard tire.

Steering

Steering Cylinder, Double Acting - Stroke

11.8 in

Steering Cylinder, Double Acting - Rod Diameter

1.4 in

Steering Cylinder, Double Acting - Bore Diameter

3.1 in

Steering Articulation Angle - Each Direction

39°

Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm

3 s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

<6 turns

Maximum Working Pressure - Steering Pump

3191 psi

Nominal Flow - Steering Pump

12 gal/min

Maximum Steering Torque - 39° (Full Turn)

27747 ft·lbf

Maximum Steering Torque - 0° (Straight Machine)

37155 ft·lbf

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349

189 ft·lbf

Drive Train

Reverse - Range 2

12 mile/h

Reverse - High Range

22 mile/h

Reverse - Range 1

6 mile/h

Forward - Range 2

12 mile/h

Forward - Range 1

6 mile/h

Forward - High Range

22 mile/h

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Width - Tread Center

4.58 ft

Width - Bucket

6.67 ft

Turning Radius - Over Bucket

14.67 ft

Turning Radius - Inside of Tires

7.33 ft

Reach - Bucket at 45°*

2.67 ft

Operating Weight

12913 lb

Note (3)

Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Note (2)

**Vary with tire.

Note (1)

*Vary with bucket.

Machine Width

6 ft

Length - Wheel Base

7.08 ft

Length - Overall*

18.42 ft

Height - Ground to Cab**

8.42 ft

Height - Ground Clearance**

11 in

Height - Bucket Pin**

10.58 ft

Dump Angle at Full Lift

45°

Dig Depth**

4.2 in

Departure Angle

33°

Clearance - Level Bucket**

9.92 ft

Clearance - Bucket at 45° *

7.67 ft

Articulation Angle

39°