The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Operating Specifications
- Rated Load Capacity
- 6500 lb
- Maximum Lift Height
- 42 ft
- Maximum Forward Reach
- 30 ft
- Top Travel Speed
- 19 mile/h
- Drawbar Pull - Loaded
- 20670 lbf
- Turning Radius - Over Tires
- 12 ft
- Frame Leveling
- 10°
- Capacity at Maximum Height
- 6500 lb
- Capacity at Maximum Reach
- 700 lb
Engine
- Engine Model
- Cat® C3.6L
- Gross Power - Basic
- 73.7 HP
- Note
- Meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 22002 lb
Dimensions
- Height
- 8 ft
- Width
- 8 ft
- Wheel Base
- 11.25 ft
- Length - Fork Face
- 18.5 ft
- Ground Clearance
- 17 in
- Turning Radius - Over Tires
- 12 ft
Tires
- Standard
- 370/75-28 Duraforce Air
- Optional (1)
- 370/75-28 Duraforce Foam Fill
- Optional (2)
- 315/95-28 Telemaster Solid
- Optional (3)
- 13.00-24 16PR Air
- Optional (4)
- 13.00-24 12PR Foam
- Optional (5)
- 370/75-28 Non-Marking Air
- Optional
- 370/75-28 Non-Marking Foam
Service Refill Capacities
- Fuel Tank
- 38.3 gal (US)
- Hydraulic System
- 42 gal (US)
Boom Performance
- Boom Up
- 15 s
- Boom Down
- 10.3 s
- Tele In
- 9.5 s
- Tele Out
- 16.3 s
Hydraulic System
- Gear Pump
- Single-section
- Auxiliary Hydraulic Pressure
- 3481 psi
- Auxiliary Hydraulic Flow
- 18 gal/min
Braking System
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle
- Service Brakes
- Inboard wet disc brakes on front and rear axles
Axles
- Type (1)
- Trunnion mounted planetary 55 degree steer axles.
- Type (2)
- High bias limited slip differential on front axle.
Work Tools
- Carriages - Dual Fork Positioning
- 50 in
- Pallet Forks - Option 2
- [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Pallet Forks - Option 3
- [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
- Pallet Forks - Option 1
- [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
- Cubing Forks
- [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Carriages - Standard Tilt
- 50 in
- Carriages - Side Shift
- 50 in
- Carriages - Swing
- 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
- Lumber Forks - Option 1
- [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Transmission Speeds
- Forward
- 4 speed
- Reverse
- 3 speed
