226D Skid Steer Loader

Request a Free Quote
Download Brochure
Available to Rent View Related Used Equipment

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Engine

Engine Model
Cat C2.2 CRDI
Net Flywheel Power
65.8 HP
Gross Power - SAE J1995
67.1 HP
Net Power - SAE 1349
65.8 HP
Displacement
134.3 in³
Stroke
3.9 in
Bore
3.3 in
Net Power - ISO 9249
66.5 HP
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf

Operating Specifications

Rated Operating Capacity
1550 lb
Tipping Load
3100 lb
Breakout Force - Tilt Cylinder
3983 lb
Rated Operating Capacity with Optional Counterweight
1650 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Weights

Operating Weight
5705 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Dimensions

Wheel Base
41.5 in
Height - Top of Cab
79.8 in
Vehicle Width over Tires
58.9 in
Ground Clearance
6.9 in
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Bucket Pin Height - Carry Position
8.5 in
Bucket Pin Height - Maximum Lift
110.9 in
Bumper Overhang - Behind Rear Axle
35.2 in
Clearance at Maximum Lift and Dump
81.8 in
Length - With Bucket on Ground
127.3 in
Length - Without Bucket
99.4 in
Maximum Overall Height
143.8 in
Maximum Reach - With Arms Parallel to Ground
50.7 in
Rack Back Angle - Maximum Height
88.9°
Reach - Maximum Lift/Dump
21 in
Turning Radius from Center - Bucket
77.8 in
Turning Radius from Center - Coupler
43.5 in
Turning Radius from Center - Machine Rear
59.6 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II

Service Refill Capacities

Cooling System
3.2 gal (US)
Engine Crankcase
2.6 gal (US)
Fuel Tank
15.1 gal (US)
Hydraulic System
11.9 gal (US)
Hydraulic Tank
9 gal (US)
Chain Box - Each Side
1.8 gal (US)

Hydraulic System

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi

Power Train

Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Inside Cab*
83 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**
102 dB(A)