The Cat® 272D3 XE Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.
Engine
- Gross Power - SAE J1995
- 110 HP
- Net Power - SAE 1349
- 106 HP
- Displacement
- 232 in³
- Stroke
- 4.7 in
- Bore
- 3.9 in
- Net Flywheel Power
- 106 HP
- Engine Model
- Cat C3.8 DIT (turbo)
- Net Power - ISO 9249
- 107 HP
- Peak Torque - 1,500 rpm - SAE J1995
- 276 ft·lbf
Operating Specifications
- Rated Operating Capacity
- 3700 lb
- Tipping Load
- 7400 lb
- Breakout Force - Tilt Cylinder
- 7362 lb
- Breakout Force - Lift Cylinder
- 6085 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
- Rated Operating Capacity with Optional Counterweight
- 3950 lb
Weights
- Operating Weight
- 9573 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Dimensions
- Wheel Base
- 54.6 in
- Height - Top of Cab
- 84 in
- Vehicle Width over Tires
- 76 in
- Ground Clearance
- 10.4 in
- Departure Angle
- 28°
- Maximum Dump Angle
- 51°
- Bumper Overhang - Behind Rear Axle
- 46.2 in
- Turning Radius from Center - Machine Rear
- 74.7 in
- Length - Without Bucket
- 127 in
- Reach - Maximum Lift/Dump
- 29 in
- Clearance at Maximum Lift and Dump
- 97.4 in
- Bucket Pin Height - Maximum Lift
- 128.6 in
- Bucket Pin Height - Carry Position
- 9.3 in
- Turning Radius from Center - Coupler
- 57.7 in
- Bucket Pin Reach - Maximum Lift
- 13.5 in
- Rack Back Angle - Maximum Height
- 84°
- Maximum Overall Height
- 161.5 in
- Length - With Bucket on Ground
- 155 in
- Maximum Reach - With Arms Parallel to Ground
- 49.1 in
- Turning Radius from Center - Bucket (racked)
- 90.6 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
- Roll Back Angle
- 28°
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Cooling System
- 4.1 gal (US)
- Engine Crankcase
- 3.5 gal (US)
- Fuel Tank
- 31.7 gal (US)
- Hydraulic System
- 14.5 gal (US)
- Hydraulic Tank
- 10.3 gal (US)
- Chain Box - Each Side
- 2.7 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5 gal (US)
Hydraulic System
- Standard Flow Mode - Loader Hydraulic Pressure
- 3335 psi
- Standard Flow Mode - Hydraulic Power - Calculated
- 44 HP
- Standard Flow Mode - Loader Hydraulic Flow
- 23 gal/min
- Note
- *When equipped with Cat 400 Series work tools.
- Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
- 4061 psi
- Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
- 40 gal/min
- Hydraulic Flow - XE - Hydraulic Power (calculated)
- 94 HP
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.2 mile/h
- Travel Speed - Forward or Reverse - Two Speed
- 10.3 mile/h
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
- Note (2)
- **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
- Outside Cab***
- 104 dB(A)
- Inside Cab**
- 83 dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (3)
- ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
