The Cat® 262D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
Engine
- Gross Power - SAE J1995
- 74.3 HP
- Net Power - SAE 1349
- 72.9 HP
- Displacement
- 203 in³
- Stroke
- 4.7 in
- Bore
- 3.7 in
- Peak Torque - 1,500 rpm - SAE J1995
- 195 ft·lbf
- Net Power - ISO 9249
- 73.7 HP
- Engine Model
- Cat C3.3B DIT (turbo)
- Net Flywheel Power
- 72.9 HP
Operating Specifications
- Rated Operating Capacity
- 2700 lb
- Rated Operating Capacity with Optional Counterweight
- 3055 lb
- Tipping Load
- 5400 lb
- Breakout Force - Tilt Cylinder
- 7355 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Weights
- Operating Weight
- 8296 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Dimensions
- Wheel Base
- 49.2 in
- Length - With Bucket on Ground
- 146.2 in
- Length - Without Bucket
- 117.9 in
- Height - Top of Cab
- 83.1 in
- Vehicle Width over Tires
- 66 in
- Maximum Overall Height
- 157.8 in
- Bucket Pin Height - Maximum Lift
- 124.9 in
- Bucket Pin Height - Carry Position
- 7.9 in
- Reach - Maximum Lift/Dump
- 30.9 in
- Clearance at Maximum Lift and Dump
- 93.7 in
- Ground Clearance
- 8.9 in
- Departure Angle
- 26°
- Bumper Overhang - Rear Axle
- 42.6 in
- Maximum Dump Angle
- 51°
- Rack Back Angle - Maximum Height
- 84°
- Bucket Pin Reach - Maximum Lift
- 15.5 in
- Turning Radius from Center - Bucket
- 85.9 in
- Turning Radius from Center - Coupler
- 55.2 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
- Maximum Reach - With Arms Parallel to Ground
- 50.9 in
- Turning Radius from Center - Machine Rear
- 71.1 in
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Chain Box - Each Side
- 3.3 gal (US)
- Cooling System
- 3.7 gal (US)
- Engine Crankcase
- 3 gal (US)
- Fuel Tank
- 27.7 gal (US)
- Hydraulic System
- 13.7 gal (US)
- Hydraulic Tank
- 10.3 gal (US)
Hydraulic System
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
- 4061 psi
- Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
- 76 HP
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 44 HP
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3335 psi
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 23 gal/min
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
- 32 gal/min
Power Train
- Travel Speed - Forward or Reverse - Two Speed Option
- 11 mile/h
- Travel Speed - Forward or Reverse - One Speed
- 7.7 mile/h
Noise Level
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Inside Cab*
- 81 dB(A)
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Outside Cab**
- 101 dB(A)
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
