The Cat 262D Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
Engine
- Engine Model
- Cat C3.3B DIT (Turbo)
- Net Flywheel Power
- 72.9 HP
- Gross Power
- 74.3 HP
- Gross Power - SAE J1995
- 74.3 HP
- Net Power - ISO 9249 EEC
- 73.7 HP
- Net Power - SAE 1349
- 72.9 HP
- Displacement
- 203 in³
- Stroke
- 4.7 in
- Bore
- 3.7 in
Operating Specifications
- Rated Operating Capacity
- 2700 lb
- Rated Operating Capacity with Optional Counterweight
- 2950 lb
- Tipping Load
- 5400 lb
- Breakout Force - Tilt Cylinder
- 7355 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
Weights
- Operating Weight
- 8011 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
Dimensions
- Wheel Base
- 49.2 in
- Length - With Bucket on Ground
- 146.2 in
- Length - Without Bucket
- 117.9 in
- Height - Top of Cab
- 83.1 in
- Vehicle Width over Tires
- 66 in
- Maximum Overall Height
- 157.8 in
- Bucket Pin Height - Maximum Lift
- 124.9 in
- Bucket Pin Height - Carry Position
- 7.9 in
- Reach - Maximum Lift/Dump
- 30.9 in
- Clearance at Maximum Lift and Dump
- 93.7 in
- Ground Clearance
- 8.9 in
- Departure Angle
- 26°
- Bumper Overhang - Rear Axle
- 42.6 in
- Maximum Dump Angle
- 51°
- Turn Radius from Center - Rear
- 71.1 in
- Turn Radius from Center - Coupler
- 55.2 in
- Turn Radius from Center - Bucket
- 85.9 in
- Maximum Reach - With Arms Parallel
- 50.9 in
- Rack Back Angle - Maximum Height
- 84°
- Bucket Pin Reach - Maximum Lift
- 15.5 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II
Power Train
- Travel Speed Forward
- 7.7 mile/h
- Travel Speed Reverse
- 7.7 mile/h
- Travel Speed Forward - 2-Speed Option
- 11 mile/h
- Travel Speed Reverse - 2-Speed Option
- 11 mile/h
Service Refill Capacities
- Chain Box - Each Side
- 3.3 gal (US)
- Cooling System
- 3.7 gal (US)
- Engine Crankcase
- 3 gal (US)
- Fuel Tank
- 24.8 gal (US)
- Hydraulic System
- 13.7 gal (US)
- Hydraulic Tank
- 10.3 gal (US)
Hydraulic System
- Hydraulic Flow (1)
- Standard
- Hydraulic Flow (2)
- High Flow XPS
- Loader Hydraulic Pressure (1)
- 3335 psi
- Loader Hydraulic Pressure (2)
- 4061 psi
- Loader Hydraulic Flow (1)
- 23 gal/min
- Loader Hydraulic Flow (2)
- 32 gal/min
- Hydraulic Power - Calculated (1)
- 44 HP
- Hydraulic Power - Calculated (2)
- 76 HP
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Noise Level
- Inside Cab*
- 81 dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Outside Cab**
- 101 dB(A)
