The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
Engine
- Engine Model
- Cat C2.2 CRDI
- Net Flywheel Power
- 65.8 HP
- Gross Power - SAE J1995
- 67.1 HP
- Net Power - SAE 1349
- 65.8 HP
- Displacement
- 134.3 in³
- Stroke
- 3.9 in
- Bore
- 3.3 in
- Net Power - ISO 9249
- 66.5 HP
- Peak Torque - 1,500 rpm - SAE J1995
- 153 ft·lbf
Operating Specifications
- Rated Operating Capacity
- 1550 lb
- Tipping Load
- 3100 lb
- Breakout Force - Tilt Cylinder
- 3983 lb
- Rated Operating Capacity with Optional Counterweight
- 1650 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Weights
- Operating Weight
- 5705 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Dimensions
- Wheel Base
- 41.5 in
- Height - Top of Cab
- 79.8 in
- Vehicle Width over Tires
- 58.9 in
- Ground Clearance
- 6.9 in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 46.7°
- Bucket Pin Height - Carry Position
- 8.5 in
- Bucket Pin Height - Maximum Lift
- 110.9 in
- Bumper Overhang - Behind Rear Axle
- 35.2 in
- Clearance at Maximum Lift and Dump
- 81.8 in
- Length - With Bucket on Ground
- 127.3 in
- Length - Without Bucket
- 99.4 in
- Maximum Overall Height
- 143.8 in
- Maximum Reach - With Arms Parallel to Ground
- 50.7 in
- Rack Back Angle - Maximum Height
- 88.9°
- Reach - Maximum Lift/Dump
- 21 in
- Turning Radius from Center - Bucket
- 77.8 in
- Turning Radius from Center - Coupler
- 43.5 in
- Turning Radius from Center - Machine Rear
- 59.6 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II
Service Refill Capacities
- Cooling System
- 3.2 gal (US)
- Engine Crankcase
- 2.6 gal (US)
- Fuel Tank
- 15.1 gal (US)
- Hydraulic System
- 11.9 gal (US)
- Hydraulic Tank
- 9 gal (US)
- Chain Box - Each Side
- 1.8 gal (US)
Hydraulic System
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 50.9 HP
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26 gal/min
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3336 psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 35.5 HP
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18 gal/min
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3336 psi
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.6 mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11.1 mile/h
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
- Inside Cab*
- 83 dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Outside Cab**
- 102 dB(A)
