Cat | D6T Track-Type Tractor | Caterpillar

Request a Free Quote
Download Brochure
Available to Rent

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 HP
Displacement
567 in³
Emissions
U.S. EPA Tier 4 Final
Net Power - 2,200 rpm - ISO 9249/SAE J1349
215 HP
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm
245 HP
Note (1)
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Build Number
19

Weights

Operating Weight
47138 lb

Service Refill Capacities

Fuel Tank
97.2 gal (US)
Cooling System
12.2 gal (US)
Engine Crankcase
6.5 gal (US)
Power Train
39.1 gal (US)
Final Drive - Each
3.6 gal (US)
Roller Frames - Each
6.6 gal (US)
Pivot Shaft Compartment
1.3 gal (US)
Hydraulic Tank
16.5 gal (US)
DEF Tank
4.5 gal (US)

Operating Weights

LGP A
53829 lb
LGP S
51385 lb
XL A
47846 lb
XL SU
47138 lb
XL VPAT
53042 lb
XW A
49797 lb
XW SU
48909 lb
XW VPAT
54045 lb
LGP VPAT
54526 lb
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

LGP A-Blade
6.46 yd³
LGP S-Blade
4.96 yd³
XL A - Blade
5.17 yd³
XL SU - Blade
7.26 yd³
XL VPAT - Blade
6.07 yd³
XW A - Blade
5.69 yd³
XW SU - Blade
7.38 yd³
XW VPAT - Blade
6.57 yd³
LGP VPAT - Blade
6.57 yd³

Blades - Width

LGP A-Blade
16.6 ft
LGP S-Blade
13.3 ft
LGP VPAT - Blade
13.7 ft
XL A - Blade
13.7 ft
XL SU - Blade
10.7 ft
XL VPAT - Blade
12.7 ft
XW A - Blade
14.8 ft
XW SU - Blade
11.7 ft
XW VPAT - Blade
13.7 ft

Dimensions - LGP

Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
5.11 psi
Length - Basic Tractor(2)
14.5 ft
Length - Track on Ground
10.67 ft
Machine Height - To Product Link Antenna(1)
10.83 ft
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
10.5 ft

Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Dimensions - LGP VPAT

Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
6.28 psi
Length - Basic Tractor(2)
16.42 ft
Length - Track on Ground
10.67 ft
Machine Height - To Product Link Antenna(1)
10.83 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
10.33 ft

Dimensions - XL

Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
8.66 psi
Length - Basic Tractor(2)
13.83 ft
Length - Track on Ground
9.25 ft
Machine Height - To Product Link Antenna(1)
10.67 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
8 ft

Dimensions - XL VPAT

Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
9.78 psi
Length - Basic Tractor(2)
16.08 ft
Length - Track on Ground
9.25 ft
Machine Height - To Product Link Antenna(1)
10.67 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
8.92 ft

Dimensions - XW

Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
6.64 psi
Length - Basic Tractor(2)
13.83 ft
Length - Track on Ground
9.25 ft
Machine Height - To Product Link Antenna(1)
10.67 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
9.17 ft

Dimensions - XW VPAT

Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
6.92 psi
Length - Basic Tractor(2)
16.42 ft
Length - Track on Ground
10.67 ft
Machine Height - To Product Link Antenna(1)
10.83 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
9.83 ft