Dimensions
|
Dipper Capacity
|
30.6-62.7 m3 (40-82 yd3)
|
|
Dipper Payload
|
120 t
|
|
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
|
120 t
|
|
Note
|
Dependent on application and material density
|
Weights
|
Ballast - Furnished By Customer
|
667150 lb
|
|
Note (1)
|
These weights will vary slightly depending upon dipper and optional equipment selection
|
|
Note (2)
|
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
|
|
Working Weight - With Dipper and Standard Links
|
3066000 lb
|
Main Structures
|
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard
|
36 ft
|
|
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads
|
38 ft
|
|
Ground Bearing Pressure - Note
|
Ground bearing pressure is dependent upon many factors
|
|
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard
|
36 m2 (382 kPa); 386 ft2 (55 psi)
|
|
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads
|
46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
|
|
Hoist
|
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
|
|
Planetary Propel
|
Dual-motor independent drive
|
|
Swing
|
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
|
|
Upper Works Overall Width - Including Standard Walkways
|
41.9 ft
|
Lube System
|
Components (1)
|
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
|
|
Components (2)
|
External FastFil from lower level
|
|
Type
|
Automatic, single-line system for open gear lubricant and grease
|
Electrical
|
Drive
|
IGBT Acutrol drive system
|
|
Power Requirements - 50 Hz
|
6,000V, 6,600V, 7,200V, 11,000V
|
|
Power Requirements - 60 Hz
|
7,200V, 13,800V
|
|
Power Requirements - Average Power Demand
|
945-1322 kW
|
|
Power Requirements - Note
|
Other voltage options available to suit customer requirements
|
|
Power Requirements - Peak power
|
3778 kW
|
|
Power Requirements - Voltage
|
3 phase, 50/60 Hz, 7,200V
|
|
System Voltage - Nominal
|
50/60 Hz, 7,200V
|
Front End
|
Crowd (1)
|
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
|
|
Crowd (2)
|
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
|
|
Rope Data - Boom Suspension - Diameter
|
3.25 in
|
|
Rope Data - Boom Suspension - No.
|
4
|
|
Rope Data - Dipper Trip - Diameter
|
0.75 in
|
|
Rope Data - Dipper Trip - No.
|
1
|
|
Rope Data - Hoist - Diameter
|
2.75 in
|
|
Rope Data - Hoist - No.
|
2
|
|
Rope Data - Note
|
High impact ropes available as an option
|
|
Type
|
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
|
Dimensions - Working Ranges
|
Dipper Capacities
|
30.6-62.7 m3 (40-82 yd3)
|
|
Dipper Payload
|
120 ton (US)
|
|
Maximum Dumping Height
|
28.9 ft
|
|
Operating Weight
|
3066000 lb
|
Dimensions (Approximate) - Optimal Working Ranges*
|
Cutting Height - Maximum
|
53.5 ft
|
|
Cutting Radius - Maximum
|
80 ft
|
|
Dumping Height - With Clearance to Open Dipper Door
|
28.9 ft
|
|
Note (1)
|
Optimal working ranges based on loading a Cat 795F AC truck.
|
|
Note (2)
|
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
|
|
Radius of Level Floor
|
56.1 ft
|
|
Revolving Frame Tail Swing Radius
|
30.5 ft
|
