Killbros Models 260 and 360 Seed Tendors

The Killbros® SeedVeyor, models 260 and 360 seed tenders and model 102 bulk box carrier combine high-speed delivery with operator-friendly control for unmatched seed-planting efficiency.

Unmatched Seed-Planting Efficiency

Time and convenience are two of your most valuable commodities at planting. That’s why more growers are discovering the benefits of delivering seed to the field and planter box in a bulk seed-handling unit like the SeedVeyor models 260 and 360.

  • Hopper
    • Dual-compartment box with 260- and 360-unit seed capacity
    • Steep-sloped sidewalls ensure fast and complete unloading
  • Conveyor
    • Conveyor features a 6″ tube with an 8″ cleated belt or an 8″ tube with a 12″ cleated (8″ conveyor on 360 only) belt to gently carry seed at speeds up to 12 or 25 bushels per minute
    • 180º conveyor swing
    • Winch-controlled height adjustment for unloading ease
    • Patented brush seal on conveyor inlet prevents seed from back-feeding
    • Removable bottom door on conveyor allows for complete cleanout
    • Conveyor locks into the transport position at either front or back
  • Undercarriage and transport
    • Undercarriage offers rubber-cushioned suspension, triple axles and electric brakes on the model 360, tandem dual axles and electric brakes on the model 260
    • Standard highway-rated tires, lights, reflectors, ball hitch and transport chain

Controls and Convenience

  • Regulate conveyor speed by simply adjusting engine speed
  • Easy-opening slide doors with rubber funnel that regulates seed flow into the conveyor and prevents overflow
  • Dual viewing windows to easily monitor contents during loading and unloading
  • Easy-to-operate hand controller with strong magnet that attaches to conveyor when not in use


  • Electronic scale package with large screen for easy viewing
  • Spare tire package
  • 10′ three-stage telescopic downspout for additional reach and filling convenience
  • Electric lift/lower for conveyor
  • Gooseneck hitch
  • Pintle hitch
  • Clevis hitch


Model 260

Model 360

Appx. empty weight (lbs.)  5,100 5,900
Tongue weight – loaded (lbs.) 1,000 1,000
Hitch type  2-5/16″ ball 2-5/16″ ball
Lighting connector  7-pin flat 7-pin flat
A Overall length 24′ 5″ 24′ 5″
B Transport width 8′ 6″ 8′ 6″
C Transport height 9′ 11″ 10′ 11″
D Overall load height 9′ 3″ 10′ 3″
E Tank length 12′ 12′
F Tank width 8′ 8′
G Tank height 8′ 1″ 9′ 1″
H Undercarriage length 21′ 21′
I Deck height 1′ 10″ 1′ 10″
J Tank base length 9′ 4″ 9′ 4″
K Tank base width 5′ 5′

Conveyor Unloading Specifications

Height – transport  6′ 10″ 6′ 10″
L Max. unload height 12′ 6″ 12′ 6″
M Reach (max. height) 12′ 5″ 12′ 5″
N Min. unload height 6′ 10″ 6′ 10″
O Reach (min. height) 14′ 8″ 14′ 8″
*Due to continuing improvements in the design and manufacture of Killbros products, all specifications contained herein are subject to change without notice.

T&G Applicator

  • Mounts to conveyor intake for talc and/or graphite application
  • Application synchronized with conveyor speed
  • Internal agitator
  • Flow-control valve for easy rate adjustment keeps talc flowing

Model 102 Bulk Box Carrier

Like the Killbros SeedVeyor models 260 and 360, the SeedVeyor model 102 bulk box carrier provides growers the advantages of cost-effective time and labor efficiency by delivering bulk seed directly to the field to your planter or drill.

Equipped with your choice of an unloading conveyor or auger, the SeedVeyor model 102 bulk box carrier features a capacity of approximately 100 seed units and comes equipped with an easy-opening 5″ x 6″ door with a rubber funnel that regulates seed flow into the conveyor or auger.

  • Conveyor
    • The 8″ cupped and cleated belt inside the 6″ steel tube gently carries seed at speeds up to 12 bushels per minute
    • Brush and patented side seals on the conveyor inlet minimize seed damage by preventing seed from back-feeding
  • Auger
    • Poly-cupped auger flighting gently carries seed at speeds up to 10 bushels per minute
  • Standard on/off wired remote with magnetic mount
  • 18′ steel tube with 4′ “ 6′ telescoping downspout can reach 30′ and is removable for filling
  • Hinged bottom door on conveyor or auger allows for easy and complete cleanout
  • The conveyor/auger locks into storage position at either the front or back of the tender
  • Undercarriage features rubber-cushioned suspension, tandem axles with electric brakes, highway-rated tires, LED lights and reflectors
  • A two-part urethane enamel finish and silicone-sealed seams for a longlasting finish on the body; undercarriage, conveyor/auger and other parts are powder-coated to resist corrosion

Killbros SeedVeyor Model 102 Bulk Box Carrier Specifications*


Model 102

Height – transport 6′ 10″
Approximate empty weight 3,300 lbs.
Loaded tongue weight 700 lbs.
Hitch type standard/optional 2-5/16″ ball/3″ pintle
Lighting connector 7-pin flat
Standard downspout reach (2-stage) 30′ (12-row planter)
Standard downspout reach (3-stage) 40′ (16-row planter)
A Overall length with bumper hitch 20′ 6″
B Overall width 8′ 6″
C Overall height 5′ 6″
D Overall load height 10′ 9″
E Platform length 8′ 2″
F Undercarriage length 17′
G Overall length past the hitch 3′ 6″
H Undercarriage deck height 1′ 10″
I Undercarriage under-frame clearance 1′ 11″

Conveyor/Auger Specifications

J Spout transport height 8′ 8″
K Overall transport height 10′ 9″
L Optional unload height (with electric lift) 11′ 2″
M Optional unload reach (with electric lift) 12′
N Standard unload height 10′ 2″
O Standard unload reach 13′
*Due to continuing improvements in the design and manufacture of Killbros products, all specifications contained herein are subject to change without notice.