Skip to content
990K Millyard Arrangement Wheel Loader

990K Millyard Arrangement Wheel Loader

Nobody moves more

Engine

Bore 5.4 in
Displacement 1649.5 in³
Emissions U.S. EPA Tier 4 Final or Tier 2 equivalent
Engine Model Cat¬ģ C27 ‚ĄĘ
Gross - ISO 14396 752 HP
Net Power 699 HP
Net Power - SAE J1349 699 HP
Peak Torque - 1,200 rpm 2624 lb/ft
Rated Speed 1,800/min
Rated Speed - Gross - ISO 14396 752 HP
Rated Speed - Gross - SAE J1995 766 HP
Rated Speed - Net Power - SAE J1349 - High Ambient 648 HP
Rated Speed - Net Power - SAE J1349 - Standard Ambient 699 HP
Stroke 6 in
Torque Rise 18 %

Operating Specifications

Operating Weight 202398 lb
Tipping Load - Articulated 35¬į 81896 lb
Tipping Load - Straight 92990 lb

Transmission

Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 8.5 mile/h
Direct Drive - Forward 3 15.2 mile/h
Direct Drive - Reverse 1 5.4 mile/h
Direct Drive - Reverse 2 9.6 mile/h
Direct Drive - Reverse 3 16.4 mile/h
Forward - 1 4.5 mile/h
Forward - 2 8.3 mile/h
Forward - 3 14.2 mile/h
Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Reverse - 1 4.9 mile/h
Reverse - 2 9.1 mile/h
Reverse - 3 15.5 mile/h
Transmission Type Cat-Planetenlastschaltgetriebe

Hydraulic System - Lift/Tilt

Cylinders, Double Acting - Lift, Bore and Stroke 254 mm √ó 1264 mm (10.0 in √ó 49.8 in)
Cylinders, Double Acting - Tilt, Bore and Stroke 317.5 mm √ó 819 mm (12.5 in √ó 32.2 in)
Lift/Tilt System Variable displacement piston
Lift/Tilt System - Circuit Positive flow control
Maximum Flow at 1,800 rpm (1) 216 gal/min
Maximum Flow at 1,800 rpm (2) 22.2 gal/min
Pilot System Open loop and pressure reducing
Relief Valve Setting - Lift/Tilt 4786 psi
Relief Valve Setting - Main 507 psi

Hydraulic Cycle Times

Dump 2.9 s
Lower 3.7 s
Lower Float Down 3.6 s
Rack Back 4.8 s
Raise 9.4 s

Service Refill Capacities

Cooling System 54.9 gal (US)
Differential - Final Drives - Front 71.6 gal (US)
Differential - Final Drives - Rear 68.9 gal (US)
Engine Crankcase 20 gal (US)
Fuel Tank 294.3 gal (US)
Hydraulic System Factory Fill 210 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan 68.9 gal (US)
Hydraulic Tank - Steering and Braking 34.9 gal (US)
Transmission 29.1 gal (US)

Axles

Front Fixed
Oscillation Angle 8.5¬į
Rear Trunnion

Brakes

Brakes SAE J1473 OKT90, ISO 3450:1992

Hydraulic System - Steering

Maximum Flow at 1,400 rpm 94.5 gal/min
Relief Valve Setting - Steering 4641 psi
Steering System - Circuit Pilot, load sensing
Steering System - Pump Piston, variable displacement
Total Steering Angle 70¬į

Sound Performance - Standard

Machine Sound Level (ISO 6395:2008) 115 dB(A)
Operator Sound Level (ISO 6396:2008) 69 dB(A)

Sound Performance - Suppression

Machine Sound Level (ISO 6395:2008) 113 dB(A)
Operator Sound Level (ISO 6396:2008) 69 dB(A)

Dimensions - Millyard Linkage - Approximate

Dump Angle at Maximum Lift 29.3 degrees
Fork Height at Maximum Lift 18.3 ft
Fork Height with Level Arms 8.9 ft
Fork Top Clamp Opening 12.3 ft
Front Axle Centerline to Fork Tip 17.6 ft
Ground to Bumper Clearance 3.1 ft
Ground to Center of Front Axle 3.9 ft
Ground to Lower Hitch Clearance 2 ft
Ground to Top of Exhaust Stacks 16.6 ft
Ground to Top of Hood 12.7 ft
Ground to Top of ROPS 17.2 ft
Hinge Pin Height at Maximum Lift 19.4 ft
Maximum Overall Length 45.4 ft
Rear Axle - Centerline to Bumper 12.5 ft
Wheel Base 15.1 ft

Forks

Fork End Area 78 ft²

Download resources

990K Millyard Arrangement Product Brochure

Get info about our financing options

Get The best solution for your job site needs

Let us help.

Name(Required)
Untitled

Call us today: 1-877-778-2230
or  Send us a message